DG-Miliano Moissanite: sparkle at the top of our scale, with the T73's light

Brilliance 86 · Fire 93 · Scintillation 98 · in our census, where the T73 scores 86 · 97 · 80 in moissanite

A three-tier pavilion under a ninety-six-facet girdle. In moissanite the census gives it sparkle at the top of our scale, but its light only matches the T73's.

The DG-Miliano in moissanite, rendered at an angle in our 3D Gemstone Simulator under studio light
Rendered in our 3D Gemstone Simulator from the DG-Miliano model, 1.00 ct, studio light.

DG-Miliano Moissanite

DG-Miliano has eight stars, eight crown mains and sixteen upper girdle facets around the table. Below a thin girdle of ninety-six facets, the pavilion falls in three tiers of sixteen. The steepest tier is at the girdle and the shallowest is at the point. The model has 177 facets and is 60.3% deep.

In moissanite it returns the light of the T73, Brilliance 86 against 86. The surprise is the diamond version: the same model returns 95 there. So on light, this design does better in the stone it was not drawn for.

Does DG-Miliano suit moissanite? Pros and cons

Compared with the T73 Round Brilliant in moissanite and with the DG-Miliano in diamond. A difference counts from 3 points (Brilliance, Fire, Tilt, Leakage), 5 (Scintillation, Symmetry), 4% (face-up size per carat) or 5% (weight); Tilt counts as a pro only for a stone within 5 points of the brilliance it is compared with. How we measure.

All eight scores against the T73

At a glance: the DG-Miliano in moissanite (white) against the T73 Round Brilliant in moissanite (dashed): solid white where it reaches further, hatched where it falls short. Each pro and con is explained, with pictures, below.

Performance wheel: DG-Miliano in moissanite, against the T73 Round Brilliant in moissanite as an outline. Solid white marks where it reaches further, hatching where it falls short. The scores are listed below.50100Global+1Brilliance0Fire−4Scintillation+18Spread+1Symmetry0Shape-norm−1Tilt+1

Against the T73 Round Brilliant in moissanite: ahead on 4, level on 2, behind on 2.

  • Global92, the comparison 91, difference +1
  • Brilliance86, the comparison 86, difference 0
  • Fire93, the comparison 97, difference −4
  • Scintillation98, the comparison 80, difference +18
  • Spread101, the comparison 100, difference +1
  • Symmetry100, the comparison 100, difference 0
  • Shape-norm92, the comparison 93, difference −1
  • Tilt95, the comparison 94, difference +1
Face-up light census, a different measure from the Cut Grading Tool; Spread and Shape-norm above 100 sit on the ring. Spread is the census's estimate from depth alone; the face-up size in the pros and cons is measured from each model's outline.

What moissanite gains in DG-Miliano

Sparkle at the top of our scale

Scintillation 98 against 80 for the T73 Round Brilliant in moissanite: 18 points higher

In our census, scintillation increases with the number of facets that light can flash from. With 177, DG-Miliano gets 98, against 80 for the 73 facets of the T73. Two other cuts on our moissanite pages tie with it: DG-Vitruvio and the Portuguese Bird's Nest.

DG-Miliano · 177 facets · Scintillation 98

T73 Round Brilliant · 73 facets · Scintillation 80

Scintillation follows the number of facets: more facets, more and smaller flashes as the stone moves. Compare the facet counts under the drawings; each drawing shows only the crown. Drawn from each cut's own model.

Try it yourself: Compare the Scintillation spoke in the Cut Performance Wheel

More fire than the diamond version

Fire 93 against 82 for the DG-Miliano in diamond: 11 points higher

This gain comes from the stone, not from the design. In moissanite, DG-Miliano is below the T73 for fire, 93 against 97. The pro counts because its gap to diamond is the larger one.

Dg-miliano in moissanite face-up under a single bright light: a render from our simulator, its colored flashes are the fire (score 93)

DG-Miliano in moissanite · Fire 93

Dg-miliano in diamond face-up under a single bright light: a render from our simulator, its colored flashes are the fire (score 82)

DG-Miliano in diamond · Fire 82

Look at the colored flashes: those are fire. Same light, same size, same face-up angle; rendered by our 3D Gemstone Simulator from each cut's own model.

Try it yourself: See the fire in the 3D Gemstone Simulator

Lighter than in diamond

0.94 ct at 6.5 mm, against 1.03 ct for the same cut in diamond (−9%)

Diamond, at 3.52 against 3.22 for moissanite, makes the same model heavier at every size.

Moissanite0.94 ctDiamond1.03 ct
A DG-Miliano 6.5 mm across, weighed from the model's measured volume and each stone's specific gravity.

Try it yourself: Weights in every gemstone on the DG-Miliano page

The catch with a DG-Miliano moissanite

Less light than in diamond

Brilliance 86 against 95 for the DG-Miliano in diamond: 9 points lower

Here the comparison is with the same model in diamond. In moissanite it returns 86, level with the T73. Its measured pavilion figure, 38.3°, is below the 39.5° guide minimum for moissanite rounds. We have not measured a steeper version, so we cannot say if one would help.

Dg-miliano in moissanite face-up Light Return map: red, green and blue show where the light returns from, gray shows where it leaks (Brilliance 86)

DG-Miliano in moissanite · Brilliance 86

Dg-miliano in diamond face-up Light Return map: red, green and blue show where the light returns from, gray shows where it leaks (Brilliance 95)

DG-Miliano in diamond · Brilliance 95

Red, green and blue = light returning to the eye; gray = leakage, light that leaves heading down or stays inside. This is the head-on view; the Brilliance score averages a wider cone of light, so the score can differ from what one picture shows.

What helps: For more light in a round moissanite, DG-M5 Moissanite returns 98 and DG-Anteros Moissanite returns 92. Both give up sparkle, at 85 and 80.

Try it yourself: Open this Light Return map in the simulator

More leakage than in diamond

Leakage 8 against 3 for the DG-Miliano in diamond: 5 points higher

Through the pavilion goes 8% of the light in our census. The diamond version loses 3%, and the T73 in moissanite 7%.

DG-Miliano in moissanite · Leakage 8

Dg-miliano in moissanite tilted 0 degrees: Light Return map, 14% of the face leaking0° · 14% leak
Dg-miliano in moissanite tilted 10 degrees: Light Return map, 7% of the face leaking10° · 7% leak
Dg-miliano in moissanite tilted 20 degrees: Light Return map, 10% of the face leaking20° · 10% leak
Dg-miliano in moissanite tilted 30 degrees: Light Return map, 15% of the face leaking30° · 15% leak

DG-Miliano in diamond · Leakage 3

Dg-miliano in diamond tilted 0 degrees: Light Return map, 1% of the face leaking0° · 1% leak
Dg-miliano in diamond tilted 10 degrees: Light Return map, 4% of the face leaking10° · 4% leak
Dg-miliano in diamond tilted 20 degrees: Light Return map, 7% of the face leaking20° · 7% leak
Dg-miliano in diamond tilted 30 degrees: Light Return map, 16% of the face leaking30° · 16% leak
Each frame is the Light Return map with the stone tilted away from you by the angle shown; gray is leakage. The share under each frame is that picture's own.

What helps: A smaller stone loses the same share. In moissanite, DG-M5 leaks 1% and the T105 Round Brilliant Moissanite 6%.

Try it yourself: Tilt it yourself in the simulator's light map

Who a DG-Miliano moissanite suits

DG-Miliano suits someone who wants sparkle at the top of our scale in a round moissanite, with no loss of light against the T73. Its sparkle is level with DG-Vitruvio and the Portuguese Bird's Nest. It also keeps a little more light when tipped, 95 against 94, but that gap is too small for us to count.

If light comes first, choose DG-M5 Moissanite. If you will cut it in diamond, the design does better there. The DG-Miliano page shows both stones.

DG-Miliano Moissanite: questions

Is DG-Miliano good for moissanite?

For sparkle, yes: Scintillation 98. In moissanite its light equals the T73's (86), and its fire is 93.

Does DG-Miliano sparkle more than a round brilliant?

In our census it does: 98 against 80 for the T73. It has 177 facets, against 73.

DG-Miliano or DG-Vitruvio in moissanite?

They tie on light (86 against 86) and on sparkle. DG-Vitruvio has more fire, 97 against 93.

What does a 6.5 mm DG-Miliano moissanite weigh?

About 0.94 ct. In diamond it would weigh 1.03 ct.

Get the DG-Miliano Cut files

6 formatsMillimetersWatertight

DG-Miliano Cut 3D files

The DG-Miliano Cut as exact geometry: 177 planar facets, real-world scale, ready for CAD, rendering, printing and casting.

  • STEPExact faceted solid for CAD
  • 3DMRhino, closed mesh on its own layer
  • STLWatertight mesh for printing and casting
  • OBJMesh for modeling and rendering
  • FBXBlender, 3ds Max, Maya, Cinema 4D, Unity, Unreal
  • GLBWeb, AR and quick previews
GemCad96 index

DG-Miliano Cut cutting files

The DG-Miliano Cut as a faceting design: 81 + 96 girdles = 177 facets, 96 index, 8-fold mirror-image symmetry, ready for the machine.

  • .ascGemCad design file, 96 index gear
  • .csvTier table: angles, indices and cutting order
  • DiagramPrintable faceting diagram

Not sure the files open in your software? Get the cube free: the same six formats, for your email address, used only to send them (privacy).

Questions before you buy? Email us.

More gemstones and cuts

Moissanite: optical properties and the top ten cuts · The DG-Miliano: specifications, model and files

Other cuts in moissanite

The DG-Miliano in other gemstones