Brilliance 91 · Fire 49 · Scintillation 98 · in our census, where the T73 scores 95 · 53 · 80 in spessartine
How the DG-Miliano handles light in spessartine, measured: brilliance 91, fire 49 and 9% leakage, set against the T73 in the same stone and against the same cut in diamond.
Light Return map of the DG-Miliano in spessartine, face-up, from our own tracer at refractive index 1.79. Red, green and blue return light to the eye; gray leaks.
DG-Miliano Spessartine
Spessartine has a refractive index of 1.790 to 1.830 and a dispersion of 0.027. Its critical angle, from the low end of that range, is 34.0°, so a round design needs a pavilion of at least 36.5° for head-on light to reflect off both sides of the pavilion and leave through the table. We trace it with one index, 1.810, the midpoint of the published range, and a fire spread of 0.023, 0.86 of the published dispersion. Every picture here is our Light Return tracer at 1.790, and every figure is from the same light census that scores the other gemstones; the 3D Gemstone Simulator shows the DG-Miliano in spessartine live.
The DG-Miliano has 177 facets and a total depth of 60.3% of its width; its pavilion mains sit at 38.3°. In spessartine, the census returns 91 of 100 for brilliance and 49 for fire, against 95 and 53 for the T73, our benchmark, in the same stone; the same DG-Miliano in diamond reads 95 and 82.
Is spessartine good in a DG-Miliano? Pros and cons, measured
Compared with the T73 Round Brilliant in spessartine and with the DG-Miliano in diamond.
A difference counts from 3 points (Brilliance, Fire, Tilt, Leakage), 5 (Scintillation,
Symmetry), 4% (face-up size per carat) or 5% (weight); Tilt counts as a pro only for a stone within
5 points of the brilliance it is compared with. How we measure.
All eight scores against the T73
At a glance: the DG-Miliano in spessartine (white) against the T73 Round Brilliant in spessartine (dashed): solid white where
it reaches further, hatched where it falls short. Each pro and con is explained, with pictures, below.
Against the T73 Round Brilliant in spessartine: ahead on 3, level on 2, behind on 3.
Global83, the comparison 83, difference 0
Brilliance91, the comparison 95, difference −4
Fire49, the comparison 53, difference −4
Scintillation98, the comparison 80, difference +18
Spread101, the comparison 100, difference +1
Symmetry100, the comparison 100, difference 0
Shape-norm98, the comparison 103, difference −5
Tilt84, the comparison 77, difference +7
Face-up light census, a different measure from the Cut Grading Tool; Spread and Shape-norm above 100 sit on the ring. Spread is the census's estimate from depth alone; the face-up size in the pros and cons is measured from each model's outline. Open it in the Cut Performance Wheel; these are the same census figures as our Cut Performance Index.
What the DG-Miliano gains in spessartine
More facets, more sparkle
Scintillation 98 against 80 for the T73 Round Brilliant in spessartine: 18 points higher
Scintillation follows the number of facets the stone shows: 100 × (1 − e^(−facets / 45)). The DG-Miliano has 177 facets and the T73 73, so 98 against 80. It depends on the geometry alone, so it is the same in every stone.
Scintillation follows the number of facets: more facets, more and smaller flashes as the stone moves. Compare the facet counts under the drawings; each drawing shows only the crown. Drawn from each cut's own model.
Tilt 84 against 77 for the T73 Round Brilliant in spessartine: 7 points higher
Tilt is how much of its face-up brilliance a stone keeps when the census tilts it 20° about its long axis, with 2,200 rays. The DG-Miliano keeps 84 against 77 for the T73. The tilt strips below show the maps at 0°, 10°, 20° and 30°, with each picture's own leak share under it.
DG-Miliano in spessartine · Tilt 84
0° · 13% leak
10° · 13% leak
20° · 25% leak
30° · 25% leak
T73 Round Brilliant in spessartine · Tilt 77
0° · 1% leak
10° · 7% leak
20° · 30% leak
30° · 29% leak
Tilt is how much of its own face-up light a stone keeps when tilted. Each frame is the Light Return map with the stone tilted away from you by the angle shown; gray is leakage. The share under each frame is that picture's own.
Fire 49 against 82 for the DG-Miliano in diamond: 33 points lower
Fire is the share of the returned light that splits into color at the exit facet: the census traces each exit again at the refractive index minus and plus the fire spread (0.023 in spessartine) and counts a ray as fire when the two directions differ by more than 0.6°. The DG-Miliano reads 49 against 82 for the same cut in diamond. The figure is the census's; the 3D Gemstone Simulator renders spessartine's fire live.
The fire figure is the census's, traced at the refractive index minus and plus the fire spread. See the fire in the 3D Gemstone Simulator: the DG-Miliano in spessartine under the sunny-day lighting.
What helps:the DG-Elongated Hexagon reads 91 for fire in spessartine, the best of the cuts we score there.
1.22 ct at 6.5 mm, against 1.03 ct for the same cut in diamond (+18%)
Weight follows specific gravity: 4.16 for spessartine against 3.52 for diamond, so the same model at the same size weighs 1.22 ct here and 1.03 ct in diamond, 6.5 mm across. Nothing about the light changes with it.
A DG-Miliano 6.5 mm across, weighed from the model's measured volume and each stone's specific gravity.
Leakage 9 against 3 for the DG-Miliano in diamond: 6 points higher
Leakage is the share of the census rays that enter the stone and leave through the pavilion, or through the crown heading down. The DG-Miliano leaks 9% in spessartine against 3% for the same cut in diamond. Grey in the maps below is leaking light; the share under each picture is that picture's own.
DG-Miliano in spessartine · Leakage 9
0° · 13% leak
10° · 13% leak
20° · 25% leak
30° · 25% leak
DG-Miliano in diamond · Leakage 3
0° · 1% leak
10° · 4% leak
20° · 7% leak
30° · 16% leak
Each frame is the Light Return map with the stone tilted away from you by the angle shown; gray is leakage. The share under each frame is that picture's own.
What helps:the DG-M5 reads 1% for leakage in spessartine, the best of the cuts we score there.
Brilliance 91 against 95 for the T73 Round Brilliant in spessartine: 4 points lower
Brilliance is the share of the 3,200 census rays that enter the stone and come back out of the crown towards the viewer. In spessartine, whose critical angle is 34.0°, the DG-Miliano returns 91 of 100 and the T73 95. The DG-Miliano's pavilion mains sit at 38.3°, the T73's at 40.8°. The maps below show where each stone's light returns from and where it leaks.
DG-Miliano in spessartine · Brilliance 91
T73 Round Brilliant in spessartine · Brilliance 95
Red, green and blue = light returning to the eye; gray = leakage, light that leaves heading down or stays inside. This is the head-on view; the Brilliance score averages a wider cone of light, so the score can differ from what one picture shows.
What helps:the DG-M5 reads 99 for brilliance in spessartine, the best of the cuts we score there.
Pick the DG-Miliano in spessartine for this: it has more facets to sparkle with and keeps its light when tilted. The catch: it shows less fire than in diamond, weighs more than in diamond, leaks more than in diamond and returns less light than the T73.
If that catch matters more to you, the DG-Elongated Hexagon reads 91 for fire in spessartine, the best of the cuts we score there.
Every figure on this page is from our light census, traced at one refractive index: a simulation of the geometry, not a grading report. The 3D files and cutting files below are the same DG-Miliano model we traced.
DG-Miliano Spessartine: questions
Is the DG-Miliano a good cut for spessartine?
In our census the DG-Miliano returns 91 of 100 for brilliance and 49 for fire in spessartine, against 95 and 53 for the T73 in the same stone. Against that round and against the same cut in diamond it has 2 pros and 4 cons by our thresholds; the summary above names them.
What pavilion angle does spessartine need?
At least 36.5° for a round design: spessartine's critical angle is 34.0°, from the low end of its refractive index range, and head-on light has to reflect off both sides of the pavilion and leave through the table. The DG-Miliano's pavilion mains sit at 38.3°.
How much does a DG-Miliano weigh in spessartine?
At 6.5 mm across, 1.22 ct in spessartine, against 1.03 ct for the same cut in diamond (+18%): spessartine's specific gravity is 4.16, diamond's 3.52.
Can I see the DG-Miliano in spessartine in 3D?
Yes: the 3D Gemstone Simulator renders it live, with spessartine's own refractive index and dispersion. Spessartine is traced by the same light census as the other gemstones, with its refractive index and fire spread derived from published values, so its scores are on the same scale; the pictures here are our Light Return tracer, and the Cut Performance Wheel sets it against any other cut and stone.
Get the DG-Miliano Cut files
6 formatsMillimetersWatertight
DG-Miliano Cut 3D files
The DG-Miliano Cut as exact geometry: 177 planar facets, real-world scale, ready for CAD,
rendering, printing and casting.
