Asscher Cut Spessartine: more fire than the T73 in spessartine
Brilliance 71 · Fire 70 · Scintillation 72 · in our census, where the T73 scores 95 · 53 · 80 in spessartine
How the Asscher Cut handles light in spessartine, measured: brilliance 71, fire 70 and 26% leakage, set against the T73 in the same stone and against the same cut in diamond.
Light Return map of the Asscher Cut in spessartine, face-up, from our own tracer at refractive index 1.79. Red, green and blue return light to the eye; gray leaks.
Asscher Cut Spessartine
Spessartine has a refractive index of 1.790 to 1.830 and a dispersion of 0.027. Its critical angle, from the low end of that range, is 34.0°, so a round design needs a pavilion of at least 36.5° for head-on light to reflect off both sides of the pavilion and leave through the table. We trace it with one index, 1.810, the midpoint of the published range, and a fire spread of 0.023, 0.86 of the published dispersion. Every picture here is our Light Return tracer at 1.790, and every figure is from the same light census that scores the other gemstones; the 3D Gemstone Simulator shows the Asscher Cut in spessartine live.
The Asscher Cut has 58 facets and a total depth of 60.4% of its width; its pavilion mains sit at 27.6°. In spessartine, the census returns 71 of 100 for brilliance and 70 for fire, against 95 and 53 for the T73, our benchmark, in the same stone; the same Asscher Cut in diamond reads 69 and 80.
Is spessartine good in an Asscher? Pros and cons, measured
Compared with the T73 Round Brilliant in spessartine and with the Asscher Cut in diamond.
A difference counts from 3 points (Brilliance, Fire, Tilt, Leakage), 5 (Scintillation,
Symmetry), 4% (face-up size per carat) or 5% (weight); Tilt counts as a pro only for a stone within
5 points of the brilliance it is compared with. How we measure.
All eight scores against the T73
At a glance: the Asscher Cut in spessartine (white) against the T73 Round Brilliant in spessartine (dashed): solid white where
it reaches further, hatched where it falls short. Each pro and con is explained, with pictures, below.
Against the T73 Round Brilliant in spessartine: ahead on 3, level on 1, behind on 4.
Global75, the comparison 83, difference −8
Brilliance71, the comparison 95, difference −24
Fire70, the comparison 53, difference +17
Scintillation72, the comparison 80, difference −8
Spread107, the comparison 100, difference +7
Symmetry100, the comparison 100, difference 0
Shape-norm93, the comparison 103, difference −10
Tilt80, the comparison 77, difference +3
Face-up light census, a different measure from the Cut Grading Tool; Spread and Shape-norm above 100 sit on the ring. Spread is the census's estimate from depth alone; the face-up size in the pros and cons is measured from each model's outline. Open it in the Cut Performance Wheel; these are the same census figures as our Cut Performance Index.
What the Asscher Cut gains in spessartine
More fire than the T73 in spessartine
Fire 70 against 53 for the T73 Round Brilliant in spessartine: 17 points higher
Fire is the share of the returned light that splits into color at the exit facet: the census traces each exit again at the refractive index minus and plus the fire spread (0.023 in spessartine) and counts a ray as fire when the two directions differ by more than 0.6°. The Asscher Cut reads 70 against 53 for the T73 in spessartine. The figure is the census's; the 3D Gemstone Simulator renders spessartine's fire live.
The fire figure is the census's, traced at the refractive index minus and plus the fire spread. See the fire in the 3D Gemstone Simulator: the Asscher Cut in spessartine under the sunny-day lighting.
Brilliance 71 against 95 for the T73 Round Brilliant in spessartine: 24 points lower
Brilliance is the share of the 3,200 census rays that enter the stone and come back out of the crown towards the viewer. In spessartine, whose critical angle is 34.0°, the Asscher Cut returns 71 of 100 and the T73 95. The Asscher Cut's pavilion mains sit at 27.6°, the T73's at 40.8°. The maps below show where each stone's light returns from and where it leaks.
Asscher Cut in spessartine · Brilliance 71
T73 Round Brilliant in spessartine · Brilliance 95
Red, green and blue = light returning to the eye; gray = leakage, light that leaves heading down or stays inside. This is the head-on view; the Brilliance score averages a wider cone of light, so the score can differ from what one picture shows.
What helps:the DG-M5 reads 99 for brilliance in spessartine, the best of the cuts we score there.
Leakage 26 against 4 for the T73 Round Brilliant in spessartine: 22 points higher
Leakage is the share of the census rays that enter the stone and leave through the pavilion, or through the crown heading down. The Asscher Cut leaks 26% in spessartine against 4% for the T73 in spessartine. Grey in the maps below is leaking light; the share under each picture is that picture's own.
Asscher Cut in spessartine · Leakage 26
0° · 30% leak
10° · 28% leak
20° · 33% leak
30° · 32% leak
T73 Round Brilliant in spessartine · Leakage 4
0° · 1% leak
10° · 7% leak
20° · 30% leak
30° · 29% leak
Each frame is the Light Return map with the stone tilted away from you by the angle shown; gray is leakage. The share under each frame is that picture's own.
What helps:the DG-M5 reads 1% for leakage in spessartine, the best of the cuts we score there.
1.59 ct at 6.5 mm, against 1.34 ct for the same cut in diamond (+18%)
Weight follows specific gravity: 4.16 for spessartine against 3.52 for diamond, so the same model at the same size weighs 1.59 ct here and 1.34 ct in diamond, 6.5 mm across. Nothing about the light changes with it.
A Asscher Cut 6.5 mm across, weighed from the model's measured volume and each stone's specific gravity.
Scintillation 72 against 80 for the T73 Round Brilliant in spessartine: 8 points lower
Scintillation follows the number of facets the stone shows: 100 × (1 − e^(−facets / 45)). The Asscher Cut has 58 facets and the T73 73, so 72 against 80. It depends on the geometry alone, so it is the same in every stone.
Scintillation follows the number of facets: more facets, more and smaller flashes as the stone moves. Compare the facet counts under the drawings; each drawing shows only the crown. Drawn from each cut's own model.
What helps:the DG-Miliano reads 98 for scintillation in spessartine, the best of the cuts we score there.
Pick the Asscher Cut in spessartine for this: it shows more fire than the T73. The catch: it returns less light than the T73, leaks more light than the T73, weighs more than in diamond and has fewer facets to sparkle with.
If that catch matters more to you, the DG-M5 reads 99 for brilliance in spessartine, the best of the cuts we score there.
Every figure on this page is from our light census, traced at one refractive index: a simulation of the geometry, not a grading report. The 3D files and cutting files below are the same Asscher Cut model we traced.
Asscher Cut Spessartine: questions
Is the Asscher a good cut for spessartine?
In our census the Asscher Cut returns 71 of 100 for brilliance and 70 for fire in spessartine, against 95 and 53 for the T73 in the same stone. Against that round and against the same cut in diamond it has 1 pro and 4 cons by our thresholds; the summary above names them.
What pavilion angle does spessartine need?
At least 36.5° for a round design: spessartine's critical angle is 34.0°, from the low end of its refractive index range, and head-on light has to reflect off both sides of the pavilion and leave through the table. The Asscher Cut's pavilion mains sit at 27.6°.
How much does a Asscher weigh in spessartine?
At 6.5 mm across, 1.59 ct in spessartine, against 1.34 ct for the same cut in diamond (+18%): spessartine's specific gravity is 4.16, diamond's 3.52.
Can I see the Asscher in spessartine in 3D?
Yes: the 3D Gemstone Simulator renders it live, with spessartine's own refractive index and dispersion. Spessartine is traced by the same light census as the other gemstones, with its refractive index and fire spread derived from published values, so its scores are on the same scale; the pictures here are our Light Return tracer, and the Cut Performance Wheel sets it against any other cut and stone.
Get the Asscher Cut files
6 formatsMillimetersWatertight
Asscher Cut 3D files
The Asscher Cut as exact geometry: 58 planar facets, real-world scale, ready for CAD,
rendering, printing and casting.
Save with a bundle: the Asscher Cut 3D files are also in Jewelry Essentials 3D, 10 cuts for €29.99 until 1 December, then €39.99 (€99.90 as single files). Buy the bundle.
Save with a bundle: the Asscher Cut cutting files are also in Faceter's Classics, 10 cuts for €22.49 until 1 December, then €29.99 (€69.90 as single files). Buy the bundle.
Not sure the files open in your software? Get the cube free: the same six formats, for your email address, used only to send them (privacy).
