DG-Octagonal Kite Spessartine: what our light census measures
Brilliance 77 · Fire 48 · Scintillation 60 · in our census, where the T73 scores 95 · 53 · 80 in spessartine
How the DG-Octagonal Kite handles light in spessartine, measured: brilliance 77, fire 48 and 23% leakage, set against the T73 in the same stone and against the same cut in diamond.
Light Return map of the DG-Octagonal Kite in spessartine, face-up, from our own tracer at refractive index 1.79. Red, green and blue return light to the eye; gray leaks.
DG-Octagonal Kite Spessartine
Spessartine has a refractive index of 1.790 to 1.830 and a dispersion of 0.027. Its critical angle, from the low end of that range, is 34.0°, so a round design needs a pavilion of at least 36.5° for head-on light to reflect off both sides of the pavilion and leave through the table. We trace it with one index, 1.810, the midpoint of the published range, and a fire spread of 0.023, 0.86 of the published dispersion. Every picture here is our Light Return tracer at 1.790, and every figure is from the same light census that scores the other gemstones; the 3D Gemstone Simulator shows the DG-Octagonal Kite in spessartine live.
The DG-Octagonal Kite has 41 facets, a table of 55.0% of its width and a total depth of 70.0% of its width; its pavilion mains sit at 43.0°. In spessartine, the census returns 77 of 100 for brilliance and 48 for fire, against 95 and 53 for the T73, our benchmark, in the same stone; the same DG-Octagonal Kite in diamond reads 88 and 82.
Is spessartine good in a DG-Octagonal Kite? Pros and cons, measured
Compared with the T73 Round Brilliant in spessartine and with the DG-Octagonal Kite in diamond.
A difference counts from 3 points (Brilliance, Fire, Tilt, Leakage), 5 (Scintillation,
Symmetry), 4% (face-up size per carat) or 5% (weight); Tilt counts as a pro only for a stone within
5 points of the brilliance it is compared with. How we measure.
All eight scores against the T73
At a glance: the DG-Octagonal Kite in spessartine (white) against the T73 Round Brilliant in spessartine (dashed): solid white where
it reaches further, hatched where it falls short. Each pro and con is explained, with pictures, below.
Against the T73 Round Brilliant in spessartine: ahead on 1, level on 1, behind on 6.
Global74, the comparison 83, difference −9
Brilliance77, the comparison 95, difference −18
Fire48, the comparison 53, difference −5
Scintillation60, the comparison 80, difference −20
Spread96, the comparison 100, difference −4
Symmetry100, the comparison 100, difference 0
Shape-norm89, the comparison 103, difference −14
Tilt95, the comparison 77, difference +18
Face-up light census, a different measure from the Cut Grading Tool; Spread and Shape-norm above 100 sit on the ring. Spread is the census's estimate from depth alone; the face-up size in the pros and cons is measured from each model's outline. Open it in the Cut Performance Wheel; these are the same census figures as our Cut Performance Index.
What the DG-Octagonal Kite gains in spessartine
Against the T73 in spessartine and the same cut in diamond, no figure of the DG-Octagonal Kite is ahead by the thresholds above. Its figures are in the wheel and the FAQ; Spessartine ranks every cut we score in spessartine.
What the DG-Octagonal Kite gives up in spessartine
Less fire in spessartine than in diamond
Fire 48 against 82 for the DG-Octagonal Kite in diamond: 34 points lower
Fire is the share of the returned light that splits into color at the exit facet: the census traces each exit again at the refractive index minus and plus the fire spread (0.023 in spessartine) and counts a ray as fire when the two directions differ by more than 0.6°. The DG-Octagonal Kite reads 48 against 82 for the same cut in diamond. The figure is the census's; the 3D Gemstone Simulator renders spessartine's fire live.
The fire figure is the census's, traced at the refractive index minus and plus the fire spread. See the fire in the 3D Gemstone Simulator: the DG-Octagonal Kite in spessartine under the sunny-day lighting.
What helps:the DG-Elongated Hexagon reads 91 for fire in spessartine, the best of the cuts we score there.
Scintillation 60 against 80 for the T73 Round Brilliant in spessartine: 20 points lower
Scintillation follows the number of facets the stone shows: 100 × (1 − e^(−facets / 45)). The DG-Octagonal Kite has 41 facets and the T73 73, so 60 against 80. It depends on the geometry alone, so it is the same in every stone.
Scintillation follows the number of facets: more facets, more and smaller flashes as the stone moves. Compare the facet counts under the drawings; each drawing shows only the crown. Drawn from each cut's own model.
What helps:the DG-Miliano reads 98 for scintillation in spessartine, the best of the cuts we score there.
Leakage 23 against 4 for the T73 Round Brilliant in spessartine: 19 points higher
Leakage is the share of the census rays that enter the stone and leave through the pavilion, or through the crown heading down. The DG-Octagonal Kite leaks 23% in spessartine against 4% for the T73 in spessartine. Grey in the maps below is leaking light; the share under each picture is that picture's own.
DG-Octagonal Kite in spessartine · Leakage 23
0° · 26% leak
10° · 23% leak
20° · 29% leak
30° · 37% leak
T73 Round Brilliant in spessartine · Leakage 4
0° · 1% leak
10° · 7% leak
20° · 30% leak
30° · 29% leak
Each frame is the Light Return map with the stone tilted away from you by the angle shown; gray is leakage. The share under each frame is that picture's own.
What helps:the DG-M5 reads 1% for leakage in spessartine, the best of the cuts we score there.
Brilliance 77 against 95 for the T73 Round Brilliant in spessartine: 18 points lower
Brilliance is the share of the 3,200 census rays that enter the stone and come back out of the crown towards the viewer. In spessartine, whose critical angle is 34.0°, the DG-Octagonal Kite returns 77 of 100 and the T73 95. The DG-Octagonal Kite's pavilion mains sit at 43.0°, the T73's at 40.8°. The maps below show where each stone's light returns from and where it leaks.
DG-Octagonal Kite in spessartine · Brilliance 77
T73 Round Brilliant in spessartine · Brilliance 95
Red, green and blue = light returning to the eye; gray = leakage, light that leaves heading down or stays inside. This is the head-on view; the Brilliance score averages a wider cone of light, so the score can differ from what one picture shows.
What helps:the DG-M5 reads 99 for brilliance in spessartine, the best of the cuts we score there.
Our verdict on the DG-Octagonal Kite in spessartine
Against the T73 in spessartine and the same cut in diamond, no figure of the DG-Octagonal Kite is ahead by our thresholds. The catch: it shows less fire than in diamond, has fewer facets to sparkle with, leaks more light than the T73 and returns less light than the T73.
If that catch matters more to you, the DG-Elongated Hexagon reads 91 for fire in spessartine, the best of the cuts we score there.
Every figure on this page is from our light census, traced at one refractive index: a simulation of the geometry, not a grading report. The 3D files and cutting files below are the same DG-Octagonal Kite model we traced.
DG-Octagonal Kite Spessartine: questions
Is the DG-Octagonal Kite a good cut for spessartine?
In our census the DG-Octagonal Kite returns 77 of 100 for brilliance and 48 for fire in spessartine, against 95 and 53 for the T73 in the same stone. Against that round and against the same cut in diamond it has 0 pros and 4 cons by our thresholds; the summary above names them.
What pavilion angle does spessartine need?
At least 36.5° for a round design: spessartine's critical angle is 34.0°, from the low end of its refractive index range, and head-on light has to reflect off both sides of the pavilion and leave through the table. The DG-Octagonal Kite's pavilion mains sit at 43.0°.
How much does a DG-Octagonal Kite weigh in spessartine?
At 6.5 mm across, 1.47 ct in spessartine, against 1.25 ct for the same cut in diamond (+18%): spessartine's specific gravity is 4.16, diamond's 3.52.
Can I see the DG-Octagonal Kite in spessartine in 3D?
Yes: the 3D Gemstone Simulator renders it live, with spessartine's own refractive index and dispersion. Spessartine is traced by the same light census as the other gemstones, with its refractive index and fire spread derived from published values, so its scores are on the same scale; the pictures here are our Light Return tracer, and the Cut Performance Wheel sets it against any other cut and stone.
Get the DG-Octagonal Kite Cut files
6 formatsMillimetersWatertight
DG-Octagonal Kite Cut 3D files
The DG-Octagonal Kite Cut as exact geometry: 41 planar facets, real-world scale, ready for CAD,
rendering, printing and casting.
