Tools

Diamond Testing Bench

See how a natural, a CVD and an HPHT diamond react to eleven tests, from a loupe to a laboratory spectrum.

Three diamonds on the bench

At home or at the counter
In the laboratory

The live stone needs WebGL2.

Natural Type Ia, grown in the earth A small crystal and a feather, both formed in the earth.

The live stone needs WebGL2.

Laboratory-grown, CVD Type IIa, annealed after growth A few dark pinpoints of non-diamond carbon.

The live stone needs WebGL2.

Laboratory-grown, HPHT Weak type IIb, as grown A dark metallic rod: flux metal from the press.

Loupe

A 10x loupe in daylight. All three stones are diamond and look alike.

Inclusions can hint at how a stone grew. They are not proof: similar marks occur in all three, and many stones show none.

What each test shows for each diamond

TestNaturalLaboratory-grown, CVDLaboratory-grown, HPHTWhat the test tells you
At home or at the counter
Loupe (on the bench)A small crystal and a feather, both formed in the earth.A few dark pinpoints of non-diamond carbon.A dark metallic rod: flux metal from the press.Inclusions can hint at how a stone grew. They are not proof: similar marks occur in all three, and many stones show none.
Thermal penDiamond.Diamond.Diamond.All diamond conducts heat much better than glass or cubic zirconia. The pen says diamond. It cannot say where the diamond grew. Moissanite also reads as diamond on a thermal pen.
UV torchA blue glow. About 35% of natural diamonds glow, and nearly all of those glow blue.Dark, like about 93% of near-colorless CVD stones.Dark, like about 98% of colorless HPHT stones.Most stones of all three origins stay dark, so no glow tells you nothing. A blue glow points to natural, but it is not proof.
MagnetNo pull.No pull.A slight pull toward the magnet.A pull is a strong sign of HPHT growth: the metal inclusions respond. No pull tells you nothing, because many HPHT stones are too clean to move.
InscriptionNone. Many natural diamonds carry none; some carry a report number.LABORATORY-GROWN and a report number.LG and a report number.An inscription is a claim, not a test. Forged inscriptions exist on laboratory-grown stones that were cut to match natural reports. Small stones rarely have an inscription.
In the laboratory
Short-wave UVA weak blue, fainter than under long-wave: the usual natural order. Lamp off: Nothing: the glow stops with the lamp.A faint green to greenish blue. Lamp off: Usually nothing. Some annealed CVD stones show a weak afterglow.Greenish yellow, stronger than under long-wave. Lamp off: A greenish-blue afterglow, for up to a few tens of seconds.A long greenish-blue afterglow is typical of HPHT growth. It comes from traces of boron. Low-dose irradiation can reduce or remove it. Some natural blue stones and some CVD stones also glow after.
Deep-UV imageBlue, with straight-sided growth bands from octahedral growth.Green-blue, with fine parallel growth layers.Blue-green growth sectors meeting in a cross.This is the most telling picture a laboratory takes, but it needs trained eyes. Some CVD stones now show no layers and look natural.
Crossed polarizersWeak, mottled gray strain.Banded strain, with some color.Almost dark: very little strain, a little round its inclusion.Almost no strain points to HPHT growth. Natural strain and CVD strain overlap, so this test cannot tell those two apart.
InfraredNitrogen in clusters at 1282 and 1175: type Ia.No nitrogen: type IIa.A trace of boron at 2800: weak type IIb.Nitrogen in clusters (type Ia) clears about 99% of natural colorless diamonds. All colorless laboratory-grown stones are type II, but about 1% of natural stones are type II too. Type II means: test further.
PhotoluminescenceA strong line at 415 nm (N3), from nitrogen clusters.The silicon pair at 737 nm, 503 nm from the annealing, a trace of 415 nm.Few lines. This stone shows a weak nickel pair near 883 and 884 nm, as about 30% of colorless HPHT stones do.No single line is proof, because each line also occurs, rarely, in the other kinds. The laboratory reads the full set, with several lasers.
Screening devicePass.Refer for further testing.Refer for further testing.Pass means natural. Refer means test further: laboratory-grown stones, simulants and some natural diamonds all get Refer. In independent tests, devices referred from under 1% to about 14% of natural stones.

A model of three typical stones. It is not a test of a real stone. Only a gemological laboratory can find where a diamond grew. How the bench is modeled, with the sources.

The Polariscope shows strain in a diamond between crossed polarizers. The Spectroscope shows the dark lines of seven gemstones in visible light.