Brilliance 79 · Fire 39 · Scintillation 98 · in our census, where the T73 scores 79 · 39 · 80 in morganite
How the DG-Vitruvio handles light in morganite, measured: brilliance 79, fire 39 and 21% leakage, set against the T73 in the same stone and against the same cut in diamond.
Morganite has a refractive index of 1.572 to 1.600 and a dispersion of 0.014. Its critical angle, from the low end of that range, is 39.5°, so a round design needs a pavilion of at least 39.5° for head-on light to reflect off both sides of the pavilion and leave through the table. We trace it with one index, 1.586, the midpoint of the published range, and a fire spread of 0.012, 0.86 of the published dispersion. Every picture here is our Light Return tracer at 1.572, and every figure is from the same light census that scores the other gemstones; the 3D Gemstone Simulator shows the DG-Vitruvio in morganite live.
The DG-Vitruvio has 153 facets and a total depth of 61.9% of its width; its pavilion mains sit at 40.8°. In morganite, the census returns 79 of 100 for brilliance and 39 for fire, against 79 and 39 for the T73, our benchmark, in the same stone; the same DG-Vitruvio in diamond reads 93 and 79.
Compared with the T73 Round Brilliant in morganite and with the DG-Vitruvio in diamond. A difference counts from 3 points (Brilliance, Fire, Tilt, Leakage), 5 (Scintillation, Symmetry), 4% (face-up size per carat) or 5% (weight); Tilt counts as a pro only for a stone within 5 points of the brilliance it is compared with. How we measure.
At a glance: the DG-Vitruvio in morganite (white) against the T73 Round Brilliant in morganite (dashed): solid white where it reaches further, hatched where it falls short. Each pro and con is explained, with pictures, below.
Against the T73 Round Brilliant in morganite: ahead on 2, level on 6.
0.83 ct at 6.5 mm, against 1.02 ct for the same cut in diamond (−19%)
Weight follows specific gravity: 2.855 for morganite against 3.52 for diamond, so the same model at the same size weighs 0.83 ct here and 1.02 ct in diamond, 6.5 mm across. Nothing about the light changes with it.
Try it yourself: Weights in every gemstone on the DG-Vitruvio page
Scintillation 98 against 80 for the T73 Round Brilliant in morganite: 18 points higher
Scintillation follows the number of facets the stone shows: 100 × (1 − e^(−facets / 45)). The DG-Vitruvio has 153 facets and the T73 73, so 98 against 80. It depends on the geometry alone, so it is the same in every stone.
DG-Vitruvio · 153 facets · Scintillation 98
T73 Round Brilliant · 73 facets · Scintillation 80
Try it yourself: Compare the Scintillation spoke in the Cut Performance Wheel
Fire 39 against 79 for the DG-Vitruvio in diamond: 40 points lower
Fire is the share of the returned light that splits into color at the exit facet: the census traces each exit again at the refractive index minus and plus the fire spread (0.012 in morganite) and counts a ray as fire when the two directions differ by more than 0.6°. The DG-Vitruvio reads 39 against 79 for the same cut in diamond. The figure is the census's; the 3D Gemstone Simulator renders morganite's fire live.
The fire figure is the census's, traced at the refractive index minus and plus the fire spread. See the fire in the 3D Gemstone Simulator: the DG-Vitruvio in morganite under the sunny-day lighting.
What helps: the Oval Cut reads 70 for fire in morganite, the best of the cuts we score there.
Leakage 21 against 2 for the DG-Vitruvio in diamond: 19 points higher
Leakage is the share of the census rays that enter the stone and leave through the pavilion, or through the crown heading down. The DG-Vitruvio leaks 21% in morganite against 2% for the same cut in diamond. Grey in the maps below is leaking light; the share under each picture is that picture's own.
DG-Vitruvio in morganite · Leakage 21
DG-Vitruvio in diamond · Leakage 2
What helps: the DG-M5 reads 9% for leakage in morganite, the best of the cuts we score there.
Try it yourself: Tilt it yourself in the simulator's light map
Tilt 77 against 93 for the DG-Vitruvio in diamond: 16 points lower
Tilt is how much of its face-up brilliance a stone keeps when the census tilts it 20° about its long axis, with 2,200 rays. The DG-Vitruvio keeps 77 against 93 for the same cut in diamond. The tilt strips below show the maps at 0°, 10°, 20° and 30°, with each picture's own leak share under it.
DG-Vitruvio in morganite · Tilt 77
DG-Vitruvio in diamond · Tilt 93
What helps: the Square Cut reads 85 for tilt in morganite, the best of the cuts we score there.
Try it yourself: Compare the Tilt spoke in the Cut Performance Wheel
Brilliance 79 against 93 for the DG-Vitruvio in diamond: 14 points lower
The same cut in diamond returns 93. Morganite bends light less than diamond: its critical angle is 39.5°, diamond's 24.4°, so a pavilion facet has to be steeper before light reflects off it rather than passing out. The DG-Vitruvio's pavilion returns less of morganite's light than of diamond's, as the two maps show.
DG-Vitruvio in morganite · Brilliance 79
DG-Vitruvio in diamond · Brilliance 93
What helps: the DG-M5 reads 91 for brilliance in morganite, the best of the cuts we score there.
Try it yourself: Open this Light Return map in the simulator
Pick the DG-Vitruvio in morganite for this: it weighs less than in diamond and has more facets to sparkle with. The catch: it shows less fire than in diamond, leaks more than in diamond, loses more light when tilted than in diamond and returns less light than in diamond.
If that catch matters more to you, the Oval Cut reads 70 for fire in morganite, the best of the cuts we score there.
Every figure on this page is from our light census, traced at one refractive index: a simulation of the geometry, not a grading report. The 3D files and cutting files below are the same DG-Vitruvio model we traced.
In our census the DG-Vitruvio returns 79 of 100 for brilliance and 39 for fire in morganite, against 79 and 39 for the T73 in the same stone. Against that round and against the same cut in diamond it has 2 pros and 4 cons by our thresholds; the summary above names them.
At least 39.5° for a round design: morganite's critical angle is 39.5°, from the low end of its refractive index range, and head-on light has to reflect off both sides of the pavilion and leave through the table. The DG-Vitruvio's pavilion mains sit at 40.8°.
At 6.5 mm across, 0.83 ct in morganite, against 1.02 ct for the same cut in diamond (-19%): morganite's specific gravity is 2.855, diamond's 3.52.
Yes: the 3D Gemstone Simulator renders it live, with morganite's own refractive index and dispersion. Morganite is traced by the same light census as the other gemstones, with its refractive index and fire spread derived from published values, so its scores are on the same scale; the pictures here are our Light Return tracer, and the Cut Performance Wheel sets it against any other cut and stone.
The DG-Vitruvio Cut as exact geometry: 265 planar facets, real-world scale, ready for CAD, rendering, printing and casting.
The DG-Vitruvio Cut as a faceting design: 57 + 96 girdles = 153 facets, 96 index, 8-fold mirror-image symmetry, ready for the machine.
Not sure the files open in your software? Get the cube free: the same six formats, for your email address, used only to send them (privacy).
Questions before you buy? Email us.
Morganite: optical properties and the top ten cuts · The DG-Vitruvio: specifications, model and files