Brilliance 70 · Fire 40 · Scintillation 79 · in our census, where the T73 scores 79 · 39 · 80 in morganite
How the Trilliant Cut handles light in morganite, measured: brilliance 70, fire 40 and 30% leakage, set against the T73 in the same stone and against the same cut in diamond.
Morganite has a refractive index of 1.572 to 1.600 and a dispersion of 0.014. Its critical angle, from the low end of that range, is 39.5°, so a round design needs a pavilion of at least 39.5° for head-on light to reflect off both sides of the pavilion and leave through the table. We trace it with one index, 1.586, the midpoint of the published range, and a fire spread of 0.012, 0.86 of the published dispersion. Every picture here is our Light Return tracer at 1.572, and every figure is from the same light census that scores the other gemstones; the 3D Gemstone Simulator shows the Trilliant Cut in morganite live.
The Trilliant Cut has 70 facets and a total depth of 58.9% of its width; its pavilion mains sit at 39.0°. In morganite, the census returns 70 of 100 for brilliance and 40 for fire, against 79 and 39 for the T73, our benchmark, in the same stone; the same Trilliant Cut in diamond reads 78 and 83.
Compared with the T73 Round Brilliant in morganite and with the Trilliant Cut in diamond. A difference counts from 3 points (Brilliance, Fire, Tilt, Leakage), 5 (Scintillation, Symmetry), 4% (face-up size per carat) or 5% (weight); Tilt counts as a pro only for a stone within 5 points of the brilliance it is compared with. How we measure.
At a glance: the Trilliant Cut in morganite (white) against the T73 Round Brilliant in morganite (dashed): solid white where it reaches further, hatched where it falls short. Each pro and con is explained, with pictures, below.
Against the T73 Round Brilliant in morganite: ahead on 2, behind on 6.
0.78 ct at 6.5 mm, against 0.96 ct for the same cut in diamond (−19%)
Weight follows specific gravity: 2.855 for morganite against 3.52 for diamond, so the same model at the same size weighs 0.78 ct here and 0.96 ct in diamond, 6.5 mm across. Nothing about the light changes with it.
Try it yourself: Weights in every gemstone on the Trilliant Cut page
Fire 40 against 83 for the Trilliant Cut in diamond: 43 points lower
Fire is the share of the returned light that splits into color at the exit facet: the census traces each exit again at the refractive index minus and plus the fire spread (0.012 in morganite) and counts a ray as fire when the two directions differ by more than 0.6°. The Trilliant Cut reads 40 against 83 for the same cut in diamond. The figure is the census's; the 3D Gemstone Simulator renders morganite's fire live.
The fire figure is the census's, traced at the refractive index minus and plus the fire spread. See the fire in the 3D Gemstone Simulator: the Trilliant Cut in morganite under the sunny-day lighting.
What helps: the Oval Cut reads 70 for fire in morganite, the best of the cuts we score there.
Symmetry 62 against 100 for the T73 Round Brilliant in morganite: 38 points lower
Symmetry reads how evenly the pavilion facets of each design family are cut: 100 − 6 × their scatter in degrees. The Trilliant Cut reads 62, the T73 100. It depends on the geometry alone, so it is the same in every stone.
Trilliant Cut · 70 facets · Symmetry 62
T73 Round Brilliant · 73 facets · Symmetry 100
Try it yourself: Compare the Symmetry spoke in the Cut Performance Wheel
Leakage 30 against 11 for the Trilliant Cut in diamond: 19 points higher
Leakage is the share of the census rays that enter the stone and leave through the pavilion, or through the crown heading down. The Trilliant Cut leaks 30% in morganite against 11% for the same cut in diamond. Grey in the maps below is leaking light; the share under each picture is that picture's own.
Trilliant Cut in morganite · Leakage 30
Trilliant Cut in diamond · Leakage 11
What helps: the DG-M5 reads 9% for leakage in morganite, the best of the cuts we score there.
Try it yourself: Tilt it yourself in the simulator's light map
Tilt 71 against 89 for the Trilliant Cut in diamond: 18 points lower
Tilt is how much of its face-up brilliance a stone keeps when the census tilts it 20° about its long axis, with 2,200 rays. The Trilliant Cut keeps 71 against 89 for the same cut in diamond. The tilt strips below show the maps at 0°, 10°, 20° and 30°, with each picture's own leak share under it.
Trilliant Cut in morganite · Tilt 71
Trilliant Cut in diamond · Tilt 89
What helps: the Square Cut reads 85 for tilt in morganite, the best of the cuts we score there.
Try it yourself: Compare the Tilt spoke in the Cut Performance Wheel
Pick the Trilliant Cut in morganite for this: it weighs less than in diamond. The catch: it shows less fire than in diamond, has a less regular pavilion than the T73, leaks more than in diamond and loses more light when tilted than in diamond.
If that catch matters more to you, the Oval Cut reads 70 for fire in morganite, the best of the cuts we score there.
Every figure on this page is from our light census, traced at one refractive index: a simulation of the geometry, not a grading report. The 3D files and cutting files below are the same Trilliant Cut model we traced.
In our census the Trilliant Cut returns 70 of 100 for brilliance and 40 for fire in morganite, against 79 and 39 for the T73 in the same stone. Against that round and against the same cut in diamond it has 1 pro and 4 cons by our thresholds; the summary above names them.
At least 39.5° for a round design: morganite's critical angle is 39.5°, from the low end of its refractive index range, and head-on light has to reflect off both sides of the pavilion and leave through the table. The Trilliant Cut's pavilion mains sit at 39.0°.
At 6.5 mm across, 0.78 ct in morganite, against 0.96 ct for the same cut in diamond (-19%): morganite's specific gravity is 2.855, diamond's 3.52.
Yes: the 3D Gemstone Simulator renders it live, with morganite's own refractive index and dispersion. Morganite is traced by the same light census as the other gemstones, with its refractive index and fire spread derived from published values, so its scores are on the same scale; the pictures here are our Light Return tracer, and the Cut Performance Wheel sets it against any other cut and stone.
The Trilliant Cut as exact geometry: 72 planar facets, real-world scale, ready for CAD, rendering, printing and casting.
The Trilliant Cut as a faceting design: 58 + 12 girdles = 70 facets, 96 index, 3-fold mirror-image symmetry, ready for the machine.
Not sure the files open in your software? Get the cube free: the same six formats, for your email address, used only to send them (privacy).
Questions before you buy? Email us.
Morganite: optical properties and the top ten cuts · The Trilliant Cut: specifications, model and files