DG-Anteros Spinel: returns more light than the T73 in spinel
Brilliance 98 · Fire 53 · Scintillation 80 · in our census, where the T73 scores 94 · 47 · 80 in spinel
How the DG-Anteros handles light in spinel, measured: brilliance 98, fire 53 and 2% leakage, set against the T73 in the same stone and against the same cut in diamond.
Light Return map of the DG-Anteros in spinel, face-up, from our own tracer at refractive index 1.712. Red, green and blue return light to the eye; gray leaks.
DG-Anteros Spinel
Spinel has a refractive index of 1.712 to 1.747 and a dispersion of 0.020. Its critical angle, from the low end of that range, is 35.7°, so a round design needs a pavilion of at least 36.1° for head-on light to reflect off both sides of the pavilion and leave through the table. We trace it with one index, 1.730, the midpoint of the published range, and a fire spread of 0.017, 0.86 of the published dispersion. Every picture here is our Light Return tracer at 1.712, and every figure is from the same light census that scores the other gemstones; the 3D Gemstone Simulator shows the DG-Anteros in spinel live.
The DG-Anteros has 73 facets, a table of 53.5% of its width and a total depth of 59.4% of its width; its pavilion mains sit at 40.1°. In spinel, the census returns 98 of 100 for brilliance and 53 for fire, against 94 and 47 for the T73, our benchmark, in the same stone; the same DG-Anteros in diamond reads 95 and 74.
Is spinel good in a DG-Anteros? Pros and cons, measured
Compared with the T73 Round Brilliant in spinel and with the DG-Anteros in diamond.
A difference counts from 3 points (Brilliance, Fire, Tilt, Leakage), 5 (Scintillation,
Symmetry), 4% (face-up size per carat) or 5% (weight); Tilt counts as a pro only for a stone within
5 points of the brilliance it is compared with. How we measure.
All eight scores against the T73
At a glance: the DG-Anteros in spinel (white) against the T73 Round Brilliant in spinel (dashed): solid white where
it reaches further, hatched where it falls short. Each pro and con is explained, with pictures, below.
Against the T73 Round Brilliant in spinel: ahead on 5, level on 3.
Global84, the comparison 81, difference +3
Brilliance98, the comparison 94, difference +4
Fire53, the comparison 47, difference +6
Scintillation80, the comparison 80, difference 0
Spread101, the comparison 100, difference +1
Symmetry100, the comparison 100, difference 0
Shape-norm105, the comparison 101, difference +4
Tilt75, the comparison 75, difference 0
Face-up light census, a different measure from the Cut Grading Tool; Spread and Shape-norm above 100 sit on the ring. Spread is the census's estimate from depth alone; the face-up size in the pros and cons is measured from each model's outline. Open it in the Cut Performance Wheel; these are the same census figures as our Cut Performance Index.
What the DG-Anteros gains in spinel
Returns more light than the T73 in spinel
Brilliance 98 against 94 for the T73 Round Brilliant in spinel: 4 points higher
Brilliance is the share of the 3,200 census rays that enter the stone and come back out of the crown towards the viewer. In spinel, whose critical angle is 35.7°, the DG-Anteros returns 98 of 100 and the T73 94. The DG-Anteros's pavilion mains sit at 40.1°, the T73's at 40.8°. The maps below show where each stone's light returns from and where it leaks.
DG-Anteros in spinel · Brilliance 98
T73 Round Brilliant in spinel · Brilliance 94
Red, green and blue = light returning to the eye; gray = leakage, light that leaves heading down or stays inside. This is the head-on view; the Brilliance score averages a wider cone of light, so the score can differ from what one picture shows.
Leakage 2 against 6 for the T73 Round Brilliant in spinel: 4 points lower
Leakage is the share of the census rays that enter the stone and leave through the pavilion, or through the crown heading down. The DG-Anteros leaks 2% in spinel against 6% for the T73 in spinel. Grey in the maps below is leaking light; the share under each picture is that picture's own.
DG-Anteros in spinel · Leakage 2
0° · 1% leak
10° · 8% leak
20° · 24% leak
30° · 32% leak
T73 Round Brilliant in spinel · Leakage 6
0° · 0% leak
10° · 15% leak
20° · 30% leak
30° · 32% leak
Each frame is the Light Return map with the stone tilted away from you by the angle shown; gray is leakage. The share under each frame is that picture's own.
Fire 53 against 74 for the DG-Anteros in diamond: 21 points lower
Fire is the share of the returned light that splits into color at the exit facet: the census traces each exit again at the refractive index minus and plus the fire spread (0.017 in spinel) and counts a ray as fire when the two directions differ by more than 0.6°. The DG-Anteros reads 53 against 74 for the same cut in diamond. The figure is the census's; the 3D Gemstone Simulator renders spinel's fire live.
The fire figure is the census's, traced at the refractive index minus and plus the fire spread. See the fire in the 3D Gemstone Simulator: the DG-Anteros in spinel under the sunny-day lighting.
What helps:the DG-Elongated Hexagon reads 80 for fire in spinel, the best of the cuts we score there.
Tilt 75 against 85 for the DG-Anteros in diamond: 10 points lower
Tilt is how much of its face-up brilliance a stone keeps when the census tilts it 20° about its long axis, with 2,200 rays. The DG-Anteros keeps 75 against 85 for the same cut in diamond. The tilt strips below show the maps at 0°, 10°, 20° and 30°, with each picture's own leak share under it.
DG-Anteros in spinel · Tilt 75
0° · 1% leak
10° · 8% leak
20° · 24% leak
30° · 32% leak
DG-Anteros in diamond · Tilt 85
0° · 2% leak
10° · 4% leak
20° · 12% leak
30° · 26% leak
Tilt is how much of its own face-up light a stone keeps when tilted. Each frame is the Light Return map with the stone tilted away from you by the angle shown; gray is leakage. The share under each frame is that picture's own.
What helps:the DG-Miliano reads 82 for tilt in spinel, the best of the cuts we score there.
Pick the DG-Anteros in spinel for this: it returns more light than the T73 and leaks less light than the T73. The catch: it shows less fire than in diamond and loses more light when tilted than in diamond.
If that catch matters more to you, the DG-Elongated Hexagon reads 80 for fire in spinel, the best of the cuts we score there.
Every figure on this page is from our light census, traced at one refractive index: a simulation of the geometry, not a grading report. The 3D files and cutting files below are the same DG-Anteros model we traced.
DG-Anteros Spinel: questions
Is the DG-Anteros a good cut for spinel?
In our census the DG-Anteros returns 98 of 100 for brilliance and 53 for fire in spinel, against 94 and 47 for the T73 in the same stone. Against that round and against the same cut in diamond it has 2 pros and 2 cons by our thresholds; the summary above names them.
What pavilion angle does spinel need?
At least 36.1° for a round design: spinel's critical angle is 35.7°, from the low end of its refractive index range, and head-on light has to reflect off both sides of the pavilion and leave through the table. The DG-Anteros's pavilion mains sit at 40.1°.
How much does a DG-Anteros weigh in spinel?
At 6.5 mm across, 1.00 ct in spinel, against 0.97 ct for the same cut in diamond (+3%): spinel's specific gravity is 3.62, diamond's 3.52.
Can I see the DG-Anteros in spinel in 3D?
Yes: the 3D Gemstone Simulator renders it live, with spinel's own refractive index and dispersion. Spinel is traced by the same light census as the other gemstones, with its refractive index and fire spread derived from published values, so its scores are on the same scale; the pictures here are our Light Return tracer, and the Cut Performance Wheel sets it against any other cut and stone.
Get the DG-Anteros Cut files
6 formatsMillimetersWatertight
DG-Anteros Cut 3D files
The DG-Anteros Cut as exact geometry: 73 planar facets, real-world scale, ready for CAD,
rendering, printing and casting.
