DG-Elongated Hexagon Chrysoberyl: faces up larger for its weight
Brilliance 27 · Fire 57 · Scintillation 51 · in our census, where the T73 scores 94 · 29 · 80 in chrysoberyl
How the DG-Elongated Hexagon handles light in chrysoberyl, measured: brilliance 27, fire 57 and 65% leakage, set against the T73 in the same stone and against the same cut in diamond.
Light Return map of the DG-Elongated Hexagon in chrysoberyl, face-up, from our own tracer at refractive index 1.746. Red, green and blue return light to the eye; gray leaks.
DG-Elongated Hexagon Chrysoberyl
Chrysoberyl has a refractive index of 1.746 to 1.755 and a dispersion of 0.015. Its critical angle, from the low end of that range, is 34.9°, so a round design needs a pavilion of at least 36.3° for head-on light to reflect off both sides of the pavilion and leave through the table. We trace it with one index, 1.751, the midpoint of the published range, and a fire spread of 0.013, 0.86 of the published dispersion. Every picture here is our Light Return tracer at 1.746, and every figure is from the same light census that scores the other gemstones; the 3D Gemstone Simulator shows the DG-Elongated Hexagon in chrysoberyl live.
The DG-Elongated Hexagon has 32 facets, a table of 50.0% of its width and a total depth of 45.3% of its width; its pavilion mains sit at 36.0°. In chrysoberyl, the census returns 27 of 100 for brilliance and 57 for fire, against 94 and 29 for the T73, our benchmark, in the same stone; the same DG-Elongated Hexagon in diamond reads 12 and 97.
Is chrysoberyl good in a DG-Elongated Hexagon? Pros and cons, measured
Compared with the T73 Round Brilliant in chrysoberyl and with the DG-Elongated Hexagon in diamond.
A difference counts from 3 points (Brilliance, Fire, Tilt, Leakage), 5 (Scintillation,
Symmetry), 4% (face-up size per carat) or 5% (weight); Tilt counts as a pro only for a stone within
5 points of the brilliance it is compared with. How we measure.
All eight scores against the T73
At a glance: the DG-Elongated Hexagon in chrysoberyl (white) against the T73 Round Brilliant in chrysoberyl (dashed): solid white where
it reaches further, hatched where it falls short. Each pro and con is explained, with pictures, below.
Against the T73 Round Brilliant in chrysoberyl: ahead on 2, behind on 6.
Global45, the comparison 77, difference −32
Brilliance27, the comparison 94, difference −67
Fire57, the comparison 29, difference +28
Scintillation51, the comparison 80, difference −29
Spread111, the comparison 100, difference +11
Symmetry73, the comparison 100, difference −27
Shape-norm35, the comparison 101, difference −66
Tilt57, the comparison 75, difference −18
Face-up light census, a different measure from the Cut Grading Tool; Spread and Shape-norm above 100 sit on the ring. Spread is the census's estimate from depth alone; the face-up size in the pros and cons is measured from each model's outline. Open it in the Cut Performance Wheel; these are the same census figures as our Cut Performance Index.
What the DG-Elongated Hexagon gains in chrysoberyl
Faces up larger for its weight
Face-up size 107 against 100 for the T73 Round Brilliant in chrysoberyl (T73 = 100): 7% more face-up area for the same weight
Face-up size is the outline's area per carat, measured from each model (T73 = 100): 107 for the DG-Elongated Hexagon against 100 for the T73. The same volume spread over a longer or shallower outline shows more face for the weight; it is the same in every stone, because specific gravity scales every cut alike.
DG-Elongated Hexagon · 8.91 x 5.24 mm at 1.00 ct · Face-up size 107
T73 Round Brilliant · 6.36 mm at 1.00 ct · Face-up size 100
Both stones weigh 1.00 ct in chrysoberyl and are drawn to the same scale in millimeters, from each cut's own model. Face-up size is the outline's area per carat, with the T73 at 100: a deeper stone, or a rounder outline, spreads less area for its weight.
What the DG-Elongated Hexagon gives up in chrysoberyl
Returns less light than the T73 in chrysoberyl
Brilliance 27 against 94 for the T73 Round Brilliant in chrysoberyl: 67 points lower
Brilliance is the share of the 3,200 census rays that enter the stone and come back out of the crown towards the viewer. In chrysoberyl, whose critical angle is 34.9°, the DG-Elongated Hexagon returns 27 of 100 and the T73 94. The DG-Elongated Hexagon's pavilion mains sit at 36.0°, the T73's at 40.8°. The maps below show where each stone's light returns from and where it leaks.
DG-Elongated Hexagon in chrysoberyl · Brilliance 27
T73 Round Brilliant in chrysoberyl · Brilliance 94
Red, green and blue = light returning to the eye; gray = leakage, light that leaves heading down or stays inside. This is the head-on view; the Brilliance score averages a wider cone of light, so the score can differ from what one picture shows.
What helps:the DG-M5 reads 100 for brilliance in chrysoberyl, the best of the cuts we score there.
Leakage 65 against 5 for the T73 Round Brilliant in chrysoberyl: 60 points higher
Leakage is the share of the census rays that enter the stone and leave through the pavilion, or through the crown heading down. The DG-Elongated Hexagon leaks 65% in chrysoberyl against 5% for the T73 in chrysoberyl. Grey in the maps below is leaking light; the share under each picture is that picture's own.
DG-Elongated Hexagon in chrysoberyl · Leakage 65
0° · 69% leak
10° · 70% leak
20° · 75% leak
30° · 75% leak
T73 Round Brilliant in chrysoberyl · Leakage 5
0° · 1% leak
10° · 11% leak
20° · 28% leak
30° · 30% leak
Each frame is the Light Return map with the stone tilted away from you by the angle shown; gray is leakage. The share under each frame is that picture's own.
What helps:the DG-M5 reads 0% for leakage in chrysoberyl, the best of the cuts we score there.
Tilt 57 against 100 for the DG-Elongated Hexagon in diamond: 43 points lower
Tilt is how much of its face-up brilliance a stone keeps when the census tilts it 20° about its long axis, with 2,200 rays. The DG-Elongated Hexagon keeps 57 against 100 for the same cut in diamond. The tilt strips below show the maps at 0°, 10°, 20° and 30°, with each picture's own leak share under it.
DG-Elongated Hexagon in chrysoberyl · Tilt 57
0° · 69% leak
10° · 70% leak
20° · 75% leak
30° · 75% leak
DG-Elongated Hexagon in diamond · Tilt 100
0° · 79% leak
10° · 72% leak
20° · 68% leak
30° · 68% leak
Tilt is how much of its own face-up light a stone keeps when tilted. Each frame is the Light Return map with the stone tilted away from you by the angle shown; gray is leakage. The share under each frame is that picture's own.
What helps:the DG-Miliano reads 83 for tilt in chrysoberyl, the best of the cuts we score there.
Fire 57 against 97 for the DG-Elongated Hexagon in diamond: 40 points lower
Fire is the share of the returned light that splits into color at the exit facet: the census traces each exit again at the refractive index minus and plus the fire spread (0.013 in chrysoberyl) and counts a ray as fire when the two directions differ by more than 0.6°. The DG-Elongated Hexagon reads 57 against 97 for the same cut in diamond. The figure is the census's; the 3D Gemstone Simulator renders chrysoberyl's fire live.
The fire figure is the census's, traced at the refractive index minus and plus the fire spread. See the fire in the 3D Gemstone Simulator: the DG-Elongated Hexagon in chrysoberyl under the sunny-day lighting.
What helps:the Oval Cut reads 67 for fire in chrysoberyl, the best of the cuts we score there.
Our verdict on the DG-Elongated Hexagon in chrysoberyl
Pick the DG-Elongated Hexagon in chrysoberyl for this: it faces up larger for its weight. The catch: it returns less light than the T73, leaks more light than the T73, loses more light when tilted than in diamond and shows less fire than in diamond.
If that catch matters more to you, the DG-M5 reads 100 for brilliance in chrysoberyl, the best of the cuts we score there.
Every figure on this page is from our light census, traced at one refractive index: a simulation of the geometry, not a grading report. The 3D files and cutting files below are the same DG-Elongated Hexagon model we traced.
DG-Elongated Hexagon Chrysoberyl: questions
Is the DG-Elongated Hexagon a good cut for chrysoberyl?
In our census the DG-Elongated Hexagon returns 27 of 100 for brilliance and 57 for fire in chrysoberyl, against 94 and 29 for the T73 in the same stone. Against that round and against the same cut in diamond it has 1 pro and 4 cons by our thresholds; the summary above names them.
What pavilion angle does chrysoberyl need?
At least 36.3° for a round design: chrysoberyl's critical angle is 34.9°, from the low end of its refractive index range, and head-on light has to reflect off both sides of the pavilion and leave through the table. The DG-Elongated Hexagon's pavilion mains sit at 36.0°.
How much does a DG-Elongated Hexagon weigh in chrysoberyl?
At 6.5 mm across, 1.91 ct in chrysoberyl, against 1.80 ct for the same cut in diamond (+6%): chrysoberyl's specific gravity is 3.73, diamond's 3.52.
Can I see the DG-Elongated Hexagon in chrysoberyl in 3D?
Yes: the 3D Gemstone Simulator renders it live, with chrysoberyl's own refractive index and dispersion. Chrysoberyl is traced by the same light census as the other gemstones, with its refractive index and fire spread derived from published values, so its scores are on the same scale; the pictures here are our Light Return tracer, and the Cut Performance Wheel sets it against any other cut and stone.
Get the DG-Elongated Hexagon Cut files
6 formatsMillimetersWatertight
DG-Elongated Hexagon Cut 3D files
The DG-Elongated Hexagon Cut as exact geometry: 32 planar facets, real-world scale, ready for CAD,
rendering, printing and casting.
