T73 Round Brilliant Chrysoberyl: more facets, more sparkle
Brilliance 94 · Fire 29 · Scintillation 80 · in our census, where the T57 scores 94 · 31 · 72 in chrysoberyl
How the T73 Round Brilliant handles light in chrysoberyl, measured: brilliance 94, fire 29 and 5% leakage, set against the T57 in the same stone and against the same cut in diamond.
Light Return map of the T73 Round Brilliant in chrysoberyl, face-up, from our own tracer at refractive index 1.746. Red, green and blue return light to the eye; gray leaks.
T73 Round Brilliant Chrysoberyl
Chrysoberyl has a refractive index of 1.746 to 1.755 and a dispersion of 0.015. Its critical angle, from the low end of that range, is 34.9°, so a round design needs a pavilion of at least 36.3° for head-on light to reflect off both sides of the pavilion and leave through the table. We trace it with one index, 1.751, the midpoint of the published range, and a fire spread of 0.013, 0.86 of the published dispersion. Every picture here is our Light Return tracer at 1.746, and every figure is from the same light census that scores the other gemstones; the 3D Gemstone Simulator shows the T73 Round Brilliant in chrysoberyl live.
The T73 Round Brilliant has 73 facets and a total depth of 61.7% of its width; its pavilion mains sit at 40.8°. In chrysoberyl, the census returns 94 of 100 for brilliance and 29 for fire, against 94 and 31 for the T57, our benchmark, in the same stone; the same T73 Round Brilliant in diamond reads 93 and 78.
Is chrysoberyl good in a T73? Pros and cons, measured
Compared with the T57 Round Brilliant in chrysoberyl and with the T73 Round Brilliant in diamond.
A difference counts from 3 points (Brilliance, Fire, Tilt, Leakage), 5 (Scintillation,
Symmetry), 4% (face-up size per carat) or 5% (weight); Tilt counts as a pro only for a stone within
5 points of the brilliance it is compared with. How we measure.
All eight scores against the T57
At a glance: the T73 Round Brilliant in chrysoberyl (white) against the T57 Round Brilliant in chrysoberyl (dashed): solid white where
it reaches further, hatched where it falls short. Each pro and con is explained, with pictures, below.
Against the T57 Round Brilliant in chrysoberyl: ahead on 3, level on 3, behind on 2.
Global77, the comparison 76, difference +1
Brilliance94, the comparison 94, difference 0
Fire29, the comparison 31, difference −2
Scintillation80, the comparison 72, difference +8
Spread100, the comparison 101, difference −1
Symmetry100, the comparison 100, difference 0
Shape-norm101, the comparison 101, difference 0
Tilt75, the comparison 73, difference +2
Face-up light census, a different measure from the Cut Grading Tool; Spread and Shape-norm above 100 sit on the ring. Spread is the census's estimate from depth alone; the face-up size in the pros and cons is measured from each model's outline. Open it in the Cut Performance Wheel; these are the same census figures as our Cut Performance Index.
What the T73 Round Brilliant gains in chrysoberyl
More facets, more sparkle
Scintillation 80 against 72 for the T57 Round Brilliant in chrysoberyl: 8 points higher
Scintillation follows the number of facets the stone shows: 100 × (1 − e^(−facets / 45)). The T73 Round Brilliant has 73 facets and the T57 57, so 80 against 72. It depends on the geometry alone, so it is the same in every stone.
Scintillation follows the number of facets: more facets, more and smaller flashes as the stone moves. Compare the facet counts under the drawings; each drawing shows only the crown. Drawn from each cut's own model.
What the T73 Round Brilliant gives up in chrysoberyl
Less fire in chrysoberyl than in diamond
Fire 29 against 78 for the T73 Round Brilliant in diamond: 49 points lower
Fire is the share of the returned light that splits into color at the exit facet: the census traces each exit again at the refractive index minus and plus the fire spread (0.013 in chrysoberyl) and counts a ray as fire when the two directions differ by more than 0.6°. The T73 Round Brilliant reads 29 against 78 for the same cut in diamond. The figure is the census's; the 3D Gemstone Simulator renders chrysoberyl's fire live.
The fire figure is the census's, traced at the refractive index minus and plus the fire spread. See the fire in the 3D Gemstone Simulator: the T73 Round Brilliant in chrysoberyl under the sunny-day lighting.
What helps:the Oval Cut reads 67 for fire in chrysoberyl, the best of the cuts we score there.
Tilt 75 against 92 for the T73 Round Brilliant in diamond: 17 points lower
Tilt is how much of its face-up brilliance a stone keeps when the census tilts it 20° about its long axis, with 2,200 rays. The T73 Round Brilliant keeps 75 against 92 for the same cut in diamond. The tilt strips below show the maps at 0°, 10°, 20° and 30°, with each picture's own leak share under it.
T73 Round Brilliant in chrysoberyl · Tilt 75
0° · 1% leak
10° · 11% leak
20° · 28% leak
30° · 30% leak
T73 Round Brilliant in diamond · Tilt 92
0° · 4% leak
10° · 2% leak
20° · 9% leak
30° · 14% leak
Tilt is how much of its own face-up light a stone keeps when tilted. Each frame is the Light Return map with the stone tilted away from you by the angle shown; gray is leakage. The share under each frame is that picture's own.
What helps:the DG-Miliano reads 83 for tilt in chrysoberyl, the best of the cuts we score there.
Face-up size 100 against 107 for the T57 Round Brilliant in chrysoberyl (T73 = 100): 7% less face-up area for the same weight
Face-up size is the outline's area per carat, measured from each model (T73 = 100): 100 for the T73 Round Brilliant against 107 for the T57. The same volume spread over a longer or shallower outline shows more face for the weight; it is the same in every stone, because specific gravity scales every cut alike.
T73 Round Brilliant · 6.36 mm at 1.00 ct · Face-up size 100
T57 Round Brilliant · 6.56 mm at 1.00 ct · Face-up size 107
Both stones weigh 1.00 ct in chrysoberyl and are drawn to the same scale in millimeters, from each cut's own model. Face-up size is the outline's area per carat, with the T73 at 100: a deeper stone, or a rounder outline, spreads less area for its weight.
What helps:the Marquise Cut reads 121 for face-up size in chrysoberyl, the best of the cuts we score there.
1.07 ct at 6.5 mm, against 1.01 ct for the same cut in diamond (+6%)
Weight follows specific gravity: 3.73 for chrysoberyl against 3.52 for diamond, so the same model at the same size weighs 1.07 ct here and 1.01 ct in diamond, 6.5 mm across. Nothing about the light changes with it.
A T73 Round Brilliant 6.5 mm across, weighed from the model's measured volume and each stone's specific gravity.
Our verdict on the T73 Round Brilliant in chrysoberyl
Pick the T73 Round Brilliant in chrysoberyl for this: it has more facets to sparkle with. The catch: it shows less fire than in diamond, loses more light when tilted than in diamond, faces up smaller for its weight and weighs more than in diamond.
If that catch matters more to you, the Oval Cut reads 67 for fire in chrysoberyl, the best of the cuts we score there.
Every figure on this page is from our light census, traced at one refractive index: a simulation of the geometry, not a grading report. The 3D files and cutting files below are the same T73 Round Brilliant model we traced.
T73 Round Brilliant Chrysoberyl: questions
Is the T73 a good cut for chrysoberyl?
In our census the T73 Round Brilliant returns 94 of 100 for brilliance and 29 for fire in chrysoberyl, against 94 and 31 for the T57 in the same stone. Against that round and against the same cut in diamond it has 1 pro and 4 cons by our thresholds; the summary above names them.
What pavilion angle does chrysoberyl need?
At least 36.3° for a round design: chrysoberyl's critical angle is 34.9°, from the low end of its refractive index range, and head-on light has to reflect off both sides of the pavilion and leave through the table. The T73 Round Brilliant's pavilion mains sit at 40.8°.
How much does a T73 weigh in chrysoberyl?
At 6.5 mm across, 1.07 ct in chrysoberyl, against 1.01 ct for the same cut in diamond (+6%): chrysoberyl's specific gravity is 3.73, diamond's 3.52.
Can I see the T73 in chrysoberyl in 3D?
Yes: the 3D Gemstone Simulator renders it live, with chrysoberyl's own refractive index and dispersion. Chrysoberyl is traced by the same light census as the other gemstones, with its refractive index and fire spread derived from published values, so its scores are on the same scale; the pictures here are our Light Return tracer, and the Cut Performance Wheel sets it against any other cut and stone.
Get the T73 Round Brilliant Cut files
6 formatsMillimetersWatertight
T73 Round Brilliant Cut 3D files
The T73 Round Brilliant Cut as exact geometry: 73 planar facets, real-world scale, ready for CAD,
rendering, printing and casting.
Save with a bundle: the T73 Round Brilliant Cut 3D files are also in Jewelry Essentials 3D, 10 cuts for €29.99 until 1 December, then €39.99 (€99.90 as single files). Buy the bundle.
Not sure the files open in your software? Get the cube free: the same six formats, for your email address, used only to send them (privacy).
