Brilliance 37 · Fire 20 · Scintillation 81 · in our census, where the T73 scores 86 · 50 · 80 in tourmaline
How the Peruzzi Cut handles light in tourmaline, measured: brilliance 37, fire 20 and 62% leakage, set against the T73 in the same stone and against the same cut in diamond.
Tourmaline has a refractive index of 1.603 to 1.655 and a dispersion of 0.017. Its critical angle, from the low end of that range, is 38.6°, so a round design needs a pavilion of at least 38.6° for head-on light to reflect off both sides of the pavilion and leave through the table. We trace it with one index, 1.629, the midpoint of the published range, and a fire spread of 0.015, 0.86 of the published dispersion. Every picture here is our Light Return tracer at 1.603, and every figure is from the same light census that scores the other gemstones; the 3D Gemstone Simulator shows the Peruzzi Cut in tourmaline live. Tourmaline is strongly doubly refractive (birefringence up to 0.040), so its back facets can look doubled. Our census traces one index (1.629), so the doubling is not in these figures.
The Peruzzi Cut has 74 facets, a table of 56.8% of its width and a total depth of 69.1% of its width; its pavilion mains sit at 46.2°. In tourmaline, the census returns 37 of 100 for brilliance and 20 for fire, against 86 and 50 for the T73, our benchmark, in the same stone; the same Peruzzi Cut in diamond reads 75 and 68.
Compared with the T73 Round Brilliant in tourmaline and with the Peruzzi Cut in diamond. A difference counts from 3 points (Brilliance, Fire, Tilt, Leakage), 5 (Scintillation, Symmetry), 4% (face-up size per carat) or 5% (weight); Tilt counts as a pro only for a stone within 5 points of the brilliance it is compared with. How we measure.
At a glance: the Peruzzi Cut in tourmaline (white) against the T73 Round Brilliant in tourmaline (dashed): solid white where it reaches further, hatched where it falls short. Each pro and con is explained, with pictures, below.
Against the T73 Round Brilliant in tourmaline: ahead on 2, behind on 6.
1.17 ct at 6.5 mm, against 1.32 ct for the same cut in diamond (−11%)
Weight follows specific gravity: 3.13 for tourmaline against 3.52 for diamond, so the same model at the same size weighs 1.17 ct here and 1.32 ct in diamond, 6.5 mm across. Nothing about the light changes with it.
Try it yourself: Weights in every gemstone on the Peruzzi Cut page
Brilliance 37 against 86 for the T73 Round Brilliant in tourmaline: 49 points lower
Brilliance is the share of the 3,200 census rays that enter the stone and come back out of the crown towards the viewer. In tourmaline, whose critical angle is 38.6°, the Peruzzi Cut returns 37 of 100 and the T73 86. The Peruzzi Cut's pavilion mains sit at 46.2°, the T73's at 40.8°. The maps below show where each stone's light returns from and where it leaks.
Peruzzi Cut in tourmaline · Brilliance 37
T73 Round Brilliant in tourmaline · Brilliance 86
What helps: the DG-M5 reads 96 for brilliance in tourmaline, the best of the cuts we score there.
Try it yourself: Open this Light Return map in the simulator
Fire 20 against 68 for the Peruzzi Cut in diamond: 48 points lower
Fire is the share of the returned light that splits into color at the exit facet: the census traces each exit again at the refractive index minus and plus the fire spread (0.015 in tourmaline) and counts a ray as fire when the two directions differ by more than 0.6°. The Peruzzi Cut reads 20 against 68 for the same cut in diamond. The figure is the census's; the 3D Gemstone Simulator renders tourmaline's fire live.
The fire figure is the census's, traced at the refractive index minus and plus the fire spread. See the fire in the 3D Gemstone Simulator: the Peruzzi Cut in tourmaline under the sunny-day lighting.
What helps: the Oval Cut reads 80 for fire in tourmaline, the best of the cuts we score there.
Leakage 62 against 14 for the T73 Round Brilliant in tourmaline: 48 points higher
Leakage is the share of the census rays that enter the stone and leave through the pavilion, or through the crown heading down. The Peruzzi Cut leaks 62% in tourmaline against 14% for the T73 in tourmaline. Grey in the maps below is leaking light; the share under each picture is that picture's own.
Peruzzi Cut in tourmaline · Leakage 62
T73 Round Brilliant in tourmaline · Leakage 14
What helps: the DG-M5 reads 4% for leakage in tourmaline, the best of the cuts we score there.
Try it yourself: Tilt it yourself in the simulator's light map
Symmetry 85 against 100 for the T73 Round Brilliant in tourmaline: 15 points lower
Symmetry reads how evenly the pavilion facets of each design family are cut: 100 − 6 × their scatter in degrees. The Peruzzi Cut reads 85, the T73 100. It depends on the geometry alone, so it is the same in every stone.
Peruzzi Cut · 74 facets · Symmetry 85
T73 Round Brilliant · 73 facets · Symmetry 100
Try it yourself: Compare the Symmetry spoke in the Cut Performance Wheel
Pick the Peruzzi Cut in tourmaline for this: it weighs less than in diamond. The catch: it returns less light than the T73, shows less fire than in diamond, leaks more light than the T73 and has a less regular pavilion than the T73.
If that catch matters more to you, the DG-M5 reads 96 for brilliance in tourmaline, the best of the cuts we score there.
Every figure on this page is from our light census, traced at one refractive index: a simulation of the geometry, not a grading report. The 3D files and cutting files below are the same Peruzzi Cut model we traced.
In our census the Peruzzi Cut returns 37 of 100 for brilliance and 20 for fire in tourmaline, against 86 and 50 for the T73 in the same stone. Against that round and against the same cut in diamond it has 1 pro and 4 cons by our thresholds; the summary above names them.
At least 38.6° for a round design: tourmaline's critical angle is 38.6°, from the low end of its refractive index range, and head-on light has to reflect off both sides of the pavilion and leave through the table. The Peruzzi Cut's pavilion mains sit at 46.2°.
At 6.5 mm across, 1.17 ct in tourmaline, against 1.32 ct for the same cut in diamond (-11%): tourmaline's specific gravity is 3.13, diamond's 3.52.
Yes: the 3D Gemstone Simulator renders it live, with tourmaline's own refractive index and dispersion. Tourmaline is traced by the same light census as the other gemstones, with its refractive index and fire spread derived from published values, so its scores are on the same scale; the pictures here are our Light Return tracer, and the Cut Performance Wheel sets it against any other cut and stone.
The Peruzzi Cut as exact geometry: 74 planar facets, real-world scale, ready for CAD, rendering, printing and casting.
The Peruzzi Cut as a faceting design: 58 + 16 girdles = 74 facets, 96 index, 4-fold mirror-image symmetry, ready for the machine.
Save with a bundle: the Peruzzi Cut 3D and cutting files are also in Historic Cuts Complete, 6 cuts for €29.99 until 1 December, then €39.99 (€101.88 as single files). Buy the bundle.
Not sure the files open in your software? Get the cube free: the same six formats, for your email address, used only to send them (privacy).
Questions before you buy? Email us.
Tourmaline: optical properties and the top ten cuts · The Peruzzi Cut: specifications, model and files