Triangle Cut Almandine: more fire than the T73 in almandine
Brilliance 36 · Fire 72 · Scintillation 34 · in our census, where the T73 scores 95 · 54 · 80 in almandine
How the Triangle Cut handles light in almandine, measured: brilliance 36, fire 72 and 38% leakage, set against the T73 in the same stone and against the same cut in diamond.
Light Return map of the Triangle Cut in almandine, face-up, from our own tracer at refractive index 1.75. Red, green and blue return light to the eye; gray leaks.
Triangle Cut Almandine
Almandine has a refractive index of 1.750 to 1.830 and a dispersion of 0.027. Its critical angle, from the low end of that range, is 34.8°, so a round design needs a pavilion of at least 36.3° for head-on light to reflect off both sides of the pavilion and leave through the table. We trace it with one index, 1.790, the midpoint of the published range, and a fire spread of 0.023, 0.86 of the published dispersion. Every picture here is our Light Return tracer at 1.750, and every figure is from the same light census that scores the other gemstones; the 3D Gemstone Simulator shows the Triangle Cut in almandine live.
The Triangle Cut has 19 facets, a table of 60.0% of its width and a total depth of 55.4% of its width; its pavilion mains sit at 41.8°. In almandine, the census returns 36 of 100 for brilliance and 72 for fire, against 95 and 54 for the T73, our benchmark, in the same stone; the same Triangle Cut in diamond reads 53 and 86.
Is almandine good in a Triangle? Pros and cons, measured
Compared with the T73 Round Brilliant in almandine and with the Triangle Cut in diamond.
A difference counts from 3 points (Brilliance, Fire, Tilt, Leakage), 5 (Scintillation,
Symmetry), 4% (face-up size per carat) or 5% (weight); Tilt counts as a pro only for a stone within
5 points of the brilliance it is compared with. How we measure.
All eight scores against the T73
At a glance: the Triangle Cut in almandine (white) against the T73 Round Brilliant in almandine (dashed): solid white where
it reaches further, hatched where it falls short. Each pro and con is explained, with pictures, below.
Against the T73 Round Brilliant in almandine: ahead on 3, level on 1, behind on 4.
Global62, the comparison 83, difference −21
Brilliance36, the comparison 95, difference −59
Fire72, the comparison 54, difference +18
Scintillation34, the comparison 80, difference −46
Spread104, the comparison 100, difference +4
Symmetry100, the comparison 100, difference 0
Shape-norm47, the comparison 102, difference −55
Tilt100, the comparison 77, difference +23
Face-up light census, a different measure from the Cut Grading Tool; Spread and Shape-norm above 100 sit on the ring. Spread is the census's estimate from depth alone; the face-up size in the pros and cons is measured from each model's outline. Open it in the Cut Performance Wheel; these are the same census figures as our Cut Performance Index.
What the Triangle Cut gains in almandine
More fire than the T73 in almandine
Fire 72 against 54 for the T73 Round Brilliant in almandine: 18 points higher
Fire is the share of the returned light that splits into color at the exit facet: the census traces each exit again at the refractive index minus and plus the fire spread (0.023 in almandine) and counts a ray as fire when the two directions differ by more than 0.6°. The Triangle Cut reads 72 against 54 for the T73 in almandine. The figure is the census's; the 3D Gemstone Simulator renders almandine's fire live.
The fire figure is the census's, traced at the refractive index minus and plus the fire spread. See the fire in the 3D Gemstone Simulator: the Triangle Cut in almandine under the sunny-day lighting.
Brilliance 36 against 95 for the T73 Round Brilliant in almandine: 59 points lower
Brilliance is the share of the 3,200 census rays that enter the stone and come back out of the crown towards the viewer. In almandine, whose critical angle is 34.8°, the Triangle Cut returns 36 of 100 and the T73 95. The Triangle Cut's pavilion mains sit at 41.8°, the T73's at 40.8°. The maps below show where each stone's light returns from and where it leaks.
Triangle Cut in almandine · Brilliance 36
T73 Round Brilliant in almandine · Brilliance 95
Red, green and blue = light returning to the eye; gray = leakage, light that leaves heading down or stays inside. This is the head-on view; the Brilliance score averages a wider cone of light, so the score can differ from what one picture shows.
What helps:the DG-M5 reads 99 for brilliance in almandine, the best of the cuts we score there.
Scintillation 34 against 80 for the T73 Round Brilliant in almandine: 46 points lower
Scintillation follows the number of facets the stone shows: 100 × (1 − e^(−facets / 45)). The Triangle Cut has 19 facets and the T73 73, so 34 against 80. It depends on the geometry alone, so it is the same in every stone.
Scintillation follows the number of facets: more facets, more and smaller flashes as the stone moves. Compare the facet counts under the drawings; each drawing shows only the crown. Drawn from each cut's own model.
What helps:the DG-Miliano reads 98 for scintillation in almandine, the best of the cuts we score there.
Leakage 38 against 5 for the T73 Round Brilliant in almandine: 33 points higher
Leakage is the share of the census rays that enter the stone and leave through the pavilion, or through the crown heading down. The Triangle Cut leaks 38% in almandine against 5% for the T73 in almandine. Grey in the maps below is leaking light; the share under each picture is that picture's own.
Triangle Cut in almandine · Leakage 38
0° · 37% leak
10° · 32% leak
20° · 34% leak
30° · 30% leak
T73 Round Brilliant in almandine · Leakage 5
0° · 1% leak
10° · 10% leak
20° · 28% leak
30° · 30% leak
Each frame is the Light Return map with the stone tilted away from you by the angle shown; gray is leakage. The share under each frame is that picture's own.
What helps:the DG-M5 reads 1% for leakage in almandine, the best of the cuts we score there.
0.93 ct at 6.5 mm, against 0.79 ct for the same cut in diamond (+17%)
Weight follows specific gravity: 4.125 for almandine against 3.52 for diamond, so the same model at the same size weighs 0.93 ct here and 0.79 ct in diamond, 6.5 mm across. Nothing about the light changes with it.
A Triangle Cut 6.5 mm across, weighed from the model's measured volume and each stone's specific gravity.
Pick the Triangle Cut in almandine for this: it shows more fire than the T73. The catch: it returns less light than the T73, has fewer facets to sparkle with, leaks more light than the T73 and weighs more than in diamond.
If that catch matters more to you, the DG-M5 reads 99 for brilliance in almandine, the best of the cuts we score there.
Every figure on this page is from our light census, traced at one refractive index: a simulation of the geometry, not a grading report. The 3D files and cutting files below are the same Triangle Cut model we traced.
Triangle Cut Almandine: questions
Is the Triangle a good cut for almandine?
In our census the Triangle Cut returns 36 of 100 for brilliance and 72 for fire in almandine, against 95 and 54 for the T73 in the same stone. Against that round and against the same cut in diamond it has 1 pro and 4 cons by our thresholds; the summary above names them.
What pavilion angle does almandine need?
At least 36.3° for a round design: almandine's critical angle is 34.8°, from the low end of its refractive index range, and head-on light has to reflect off both sides of the pavilion and leave through the table. The Triangle Cut's pavilion mains sit at 41.8°.
How much does a Triangle weigh in almandine?
At 6.5 mm across, 0.93 ct in almandine, against 0.79 ct for the same cut in diamond (+17%): almandine's specific gravity is 4.125, diamond's 3.52.
Can I see the Triangle in almandine in 3D?
Yes: the 3D Gemstone Simulator renders it live, with almandine's own refractive index and dispersion. Almandine is traced by the same light census as the other gemstones, with its refractive index and fire spread derived from published values, so its scores are on the same scale; the pictures here are our Light Return tracer, and the Cut Performance Wheel sets it against any other cut and stone.
Get the Triangle Cut files
6 formatsMillimetersWatertight
Triangle Cut 3D files
The Triangle Cut as exact geometry: 19 planar facets, real-world scale, ready for CAD,
rendering, printing and casting.
