Teardrop Cut Synthetic rutile: faces up larger for its weight
Brilliance 36 · Fire 92 · Scintillation 81 · in our census, where the T73 scores 81 · 94 · 80 in synthetic rutile
How the Teardrop Cut handles light in synthetic rutile, measured: brilliance 36, fire 92 and 31% leakage, set against the T73 in the same stone and against the same cut in diamond.
Light Return map of the Teardrop Cut in synthetic rutile, face-up, from our own tracer at refractive index 2.616. Red, green and blue return light to the eye; gray leaks.
Teardrop Cut Synthetic rutile
Synthetic rutile has a refractive index of 2.616 to 2.903 and a dispersion of 0.330. Its critical angle, from the low end of that range, is 22.5°, so a round design needs a pavilion of at least 39.4° for head-on light to reflect off both sides of the pavilion and leave through the table. We trace it with one index, 2.760, the midpoint of the published range, and a fire spread of 0.284, 0.86 of the published dispersion. Every picture here is our Light Return tracer at 2.616, and every figure is from the same light census that scores the other gemstones; the 3D Gemstone Simulator shows the Teardrop Cut in synthetic rutile live. Synthetic rutile is strongly doubly refractive (birefringence 0.287): its two rays have critical angles of 22.5° and 20.1°. Our census traces one index, so every figure for it is a rough approximation.
The Teardrop Cut has 74 facets and a total depth of 60.0% of its width; its pavilion mains sit at 38.5°. In synthetic rutile, the census returns 36 of 100 for brilliance and 92 for fire, against 81 and 94 for the T73, our benchmark, in the same stone; the same Teardrop Cut in diamond reads 46 and 89.
Is synthetic rutile good in a Teardrop? Pros and cons, measured
Compared with the T73 Round Brilliant in synthetic rutile and with the Teardrop Cut in diamond.
A difference counts from 3 points (Brilliance, Fire, Tilt, Leakage), 5 (Scintillation,
Symmetry), 4% (face-up size per carat) or 5% (weight); Tilt counts as a pro only for a stone within
5 points of the brilliance it is compared with. How we measure.
All eight scores against the T73
At a glance: the Teardrop Cut in synthetic rutile (white) against the T73 Round Brilliant in synthetic rutile (dashed): solid white where
it reaches further, hatched where it falls short. Each pro and con is explained, with pictures, below.
Against the T73 Round Brilliant in synthetic rutile: ahead on 2, behind on 6.
Global70, the comparison 88, difference −18
Brilliance36, the comparison 81, difference −45
Fire92, the comparison 94, difference −2
Scintillation81, the comparison 80, difference +1
Spread101, the comparison 100, difference +1
Symmetry98, the comparison 100, difference −2
Shape-norm42, the comparison 87, difference −45
Tilt87, the comparison 94, difference −7
Face-up light census, a different measure from the Cut Grading Tool; Spread and Shape-norm above 100 sit on the ring. Spread is the census's estimate from depth alone; the face-up size in the pros and cons is measured from each model's outline. Open it in the Cut Performance Wheel; these are the same census figures as our Cut Performance Index.
What the Teardrop Cut gains in synthetic rutile
Faces up larger for its weight
Face-up size 116 against 100 for the T73 Round Brilliant in synthetic rutile (T73 = 100): 16% more face-up area for the same weight
Face-up size is the outline's area per carat, measured from each model (T73 = 100): 116 for the Teardrop Cut against 100 for the T73. The same volume spread over a longer or shallower outline shows more face for the weight; it is the same in every stone, because specific gravity scales every cut alike.
Teardrop Cut · 8.11 x 5.61 mm at 1.00 ct · Face-up size 116
T73 Round Brilliant · 6.08 mm at 1.00 ct · Face-up size 100
Both stones weigh 1.00 ct in synthetic rutile and are drawn to the same scale in millimeters, from each cut's own model. Face-up size is the outline's area per carat, with the T73 at 100: a deeper stone, or a rounder outline, spreads less area for its weight.
Fire 92 against 89 for the Teardrop Cut in diamond: 3 points higher
Fire is the share of the returned light that splits into color at the exit facet: the census traces each exit again at the refractive index minus and plus the fire spread (0.284 in synthetic rutile) and counts a ray as fire when the two directions differ by more than 0.6°. The Teardrop Cut reads 92 against 89 for the same cut in diamond. The figure is the census's; the 3D Gemstone Simulator renders synthetic rutile's fire live.
The fire figure is the census's, traced at the refractive index minus and plus the fire spread. See the fire in the 3D Gemstone Simulator: the Teardrop Cut in synthetic rutile under the sunny-day lighting.
What the Teardrop Cut gives up in synthetic rutile
Returns less light than the T73 in synthetic rutile
Brilliance 36 against 81 for the T73 Round Brilliant in synthetic rutile: 45 points lower
Brilliance is the share of the 3,200 census rays that enter the stone and come back out of the crown towards the viewer. In synthetic rutile, whose critical angle is 22.5°, the Teardrop Cut returns 36 of 100 and the T73 81. The Teardrop Cut's pavilion mains sit at 38.5°, the T73's at 40.8°. The maps below show where each stone's light returns from and where it leaks.
Teardrop Cut in synthetic rutile · Brilliance 36
T73 Round Brilliant in synthetic rutile · Brilliance 81
Red, green and blue = light returning to the eye; gray = leakage, light that leaves heading down or stays inside. This is the head-on view; the Brilliance score averages a wider cone of light, so the score can differ from what one picture shows.
What helps:the DG-M5 reads 97 for brilliance in synthetic rutile, the best of the cuts we score there.
Leakage 31 against 10 for the T73 Round Brilliant in synthetic rutile: 21 points higher
Leakage is the share of the census rays that enter the stone and leave through the pavilion, or through the crown heading down. The Teardrop Cut leaks 31% in synthetic rutile against 10% for the T73 in synthetic rutile. Grey in the maps below is leaking light; the share under each picture is that picture's own.
Teardrop Cut in synthetic rutile · Leakage 31
0° · 37% leak
10° · 38% leak
20° · 39% leak
30° · 45% leak
T73 Round Brilliant in synthetic rutile · Leakage 10
0° · 10% leak
10° · 6% leak
20° · 10% leak
30° · 15% leak
Each frame is the Light Return map with the stone tilted away from you by the angle shown; gray is leakage. The share under each frame is that picture's own.
What helps:the DG-M5 reads 2% for leakage in synthetic rutile, the best of the cuts we score there.
1.55 ct at 6.5 mm, against 1.28 ct for the same cut in diamond (+21%)
Weight follows specific gravity: 4.26 for synthetic rutile against 3.52 for diamond, so the same model at the same size weighs 1.55 ct here and 1.28 ct in diamond, 6.5 mm across. Nothing about the light changes with it.
A Teardrop Cut 6.5 mm across, weighed from the model's measured volume and each stone's specific gravity.
Tilt 87 against 94 for the T73 Round Brilliant in synthetic rutile: 7 points lower
Tilt is how much of its face-up brilliance a stone keeps when the census tilts it 20° about its long axis, with 2,200 rays. The Teardrop Cut keeps 87 against 94 for the T73. The tilt strips below show the maps at 0°, 10°, 20° and 30°, with each picture's own leak share under it.
Teardrop Cut in synthetic rutile · Tilt 87
0° · 37% leak
10° · 38% leak
20° · 39% leak
30° · 45% leak
T73 Round Brilliant in synthetic rutile · Tilt 94
0° · 10% leak
10° · 6% leak
20° · 10% leak
30° · 15% leak
Tilt is how much of its own face-up light a stone keeps when tilted. Each frame is the Light Return map with the stone tilted away from you by the angle shown; gray is leakage. The share under each frame is that picture's own.
What helps:the Old European Cut reads 100 for tilt in synthetic rutile, the best of the cuts we score there.
Our verdict on the Teardrop Cut in synthetic rutile
Pick the Teardrop Cut in synthetic rutile for this: it faces up larger for its weight and shows more fire than in diamond. The catch: it returns less light than the T73, leaks more light than the T73, weighs more than in diamond and loses more of its light when tilted.
If that catch matters more to you, the DG-M5 reads 97 for brilliance in synthetic rutile, the best of the cuts we score there.
Every figure on this page is from our light census, traced at one refractive index: a simulation of the geometry, not a grading report. The 3D files and cutting files below are the same Teardrop Cut model we traced.
Teardrop Cut Synthetic rutile: questions
Is the Teardrop a good cut for synthetic rutile?
In our census the Teardrop Cut returns 36 of 100 for brilliance and 92 for fire in synthetic rutile, against 81 and 94 for the T73 in the same stone. Against that round and against the same cut in diamond it has 2 pros and 4 cons by our thresholds; the summary above names them.
What pavilion angle does synthetic rutile need?
At least 39.4° for a round design: synthetic rutile's critical angle is 22.5°, from the low end of its refractive index range, and head-on light has to reflect off both sides of the pavilion and leave through the table. The Teardrop Cut's pavilion mains sit at 38.5°.
How much does a Teardrop weigh in synthetic rutile?
At 6.5 mm across, 1.55 ct in synthetic rutile, against 1.28 ct for the same cut in diamond (+21%): synthetic rutile's specific gravity is 4.26, diamond's 3.52.
Can I see the Teardrop in synthetic rutile in 3D?
Yes: the 3D Gemstone Simulator renders it live, with synthetic rutile's own refractive index and dispersion. Synthetic rutile is traced by the same light census as the other gemstones, with its refractive index and fire spread derived from published values, so its scores are on the same scale; the pictures here are our Light Return tracer, and the Cut Performance Wheel sets it against any other cut and stone.
Get the Teardrop Cut files
6 formatsMillimetersWatertight
Teardrop Cut 3D files
The Teardrop Cut as exact geometry: 74 planar facets, real-world scale, ready for CAD,
rendering, printing and casting.
