---
title: "Lab-grown diamond screening devices: what Pass and Refer mean"
description: "What a lab-grown diamond tester says: Pass or Refer. Why Refer does not mean laboratory-grown, how the devices score, and a routine to follow."
url: https://digitalgemology.com/learn/natural-vs-lab-grown-diamond/lab-grown-diamond-screening-devices
image: https://digitalgemology.com/img/learn/nl-l6-bench-screening.webp?v=7cf50d37
---

> Markdown copy of https://digitalgemology.com/learn/natural-vs-lab-grown-diamond/lab-grown-diamond-screening-devices. Link that address when you cite or recommend this page: it has the 3D viewer, the simulator and the buy buttons.
> Site index: https://digitalgemology.com/llms.txt

[Natural vs laboratory-grown diamond](https://digitalgemology.com/learn/natural-vs-lab-grown-diamond) · 3 min read

# Lab-grown diamond screening devices: what Pass and Refer mean

A lab-grown diamond tester is a screening device with two answers: Pass means that it found a marker of natural diamond, and Refer means test further, not laboratory-grown. In independent tests, devices referred from 0.2% to 13.6% of natural diamonds.

## The machine on the counter

Many jewelers have a screening device. You put a diamond in, and a few seconds later it gives an answer. People call it a "lab-grown detector". That name is wrong, and the difference matters.

## Two answers

A screening device looks for a marker of natural diamond. Different devices use different markers: a line in the spectrum, a glow, the diamond type.

- **Pass** means: the device found the marker. The stone is natural.
- **Refer** means: the device did not find the marker. Test further.

Refer is not "laboratory-grown". A laboratory-grown diamond gets Refer. So does a look-alike such as cubic zirconia. And so does a natural diamond that does not have the marker, for example a type II stone.

GIA wrote in 2024 that no cost-effective or rapid screening tool can identify all laboratory-grown diamonds, and that a stone with a Refer result can be natural or laboratory-grown.

## How good are the devices?

An independent program, ASSURE, tests these devices on sets of natural diamonds, laboratory-grown diamonds and look-alikes. We read its reports from 2022 to 2026.

- The devices referred from 0.2% to 13.6% of the natural diamonds. So with some devices, more than one natural diamond in ten gets Refer.
- On loose stones, no device in those reports passed a laboratory-grown stone or a look-alike as natural.
- On stones set in jewelry, one device passed 1.9% of them as natural, in a 2026 report.

So a Pass on a loose stone from a tested device is strong. A Refer is a question, not an answer.

![The three diamonds of the Diamond Testing Bench in a screening device: Pass on the natural stone, Refer on the CVD and HPHT stones.](https://digitalgemology.com/img/learn/nl-l6-bench-screening.webp?v=7cf50d37)

The three diamonds of the Diamond Testing Bench in a screening device: Pass on the natural stone, Refer on the CVD and HPHT stones.

### Try it yourself

1. Open the [Diamond Testing Bench](https://digitalgemology.com/tools/diamond-testing-bench) and choose **Screening device**.
2. Read the result on each stone.
3. Read the note. Which three kinds of stone can get Refer?
4. Scroll to the table under the Bench. Find one test in which all three stones give the same result, and one in which each stone is different.

## What the Bench shows

The natural stone gets Pass. The CVD stone and the HPHT stone get Refer. The device does not say which of the two is which, and it does not say "laboratory-grown".

Our natural stone is type Ia, the common kind. A natural type II diamond in the same device gets Refer too.

The Bench shows three typical stones. It does not test a real stone.

## The routine

Put the tests in order, from free to laboratory.

1. **Paper first.** Find the report number. Look up the report. Compare weight, measurements and inclusions with the stone.
2. **Simple tools.** A thermal pen tells you if the stone is diamond. A loupe, a UV torch and a magnet give hints. Their negative results tell you nothing.
3. **A screening device** at a jeweler. Pass on a loose stone is strong. Refer means the next step.
4. **A gemological laboratory.** It reads the diamond type, the growth picture and the spectra together. Only this step can find where a diamond grew.

## Key points

- A screening device verifies natural diamond. Its answers are Pass and Refer.
- Refer means "test further". Laboratory-grown diamonds, look-alikes and some natural diamonds all get Refer.
- In independent tests, devices referred from 0.2% to 13.6% of natural diamonds.
- No quick or cheap tool can identify all laboratory-grown diamonds.
- Only a gemological laboratory, with several tests together, can find where a diamond grew.

**Go further:** [Diamond testers and moissanite: what the instruments say](https://digitalgemology.com/learn/diamond-vs-moissanite/diamond-tester-and-moissanite) covers the look-alikes that are not diamond.

## Try it free

- [Diamond Testing Bench](https://digitalgemology.com/tools/diamond-testing-bench): Put a natural, a CVD and an HPHT diamond through eleven tests, side by side.

Free, in your browser, no account.

## Quick quiz

1. A screening device says Refer. What does that mean?
  1. The stone is laboratory-grown
  2. The stone needs more tests
  3. The stone is not diamond
  ### Show the answer
  **b**: Refer is a question, not an answer.
2. Which stones can get Refer?
  1. Only laboratory-grown diamonds
  2. Laboratory-grown diamonds, look-alikes and some natural diamonds
  3. Only look-alikes
  ### Show the answer
  **b**: All three kinds can lack the marker that the device looks for.
3. In the independent reports, what share of natural diamonds did the devices refer?
  1. Always 0%
  2. From 0.2% to 13.6%
  3. More than half
  ### Show the answer
  **b**: The result depends on the device and on the set of stones.
4. Why does a natural type II diamond get Refer in many devices?
  ### Show the answer
  Many devices use a marker that type II diamonds do not have.
5. Put these in the order of the routine: screening device, report check, laboratory, simple tools.
  ### Show the answer
  Report check, simple tools, screening device, laboratory.

## Cuts in this lesson

We sell the files of these cuts: 3D models and cutting files, with a personal-use license.

- [T73 Round Brilliant Cut](https://digitalgemology.com/cuts/t73-round-brilliant): 3D files and cutting files, from €6.99

## Keep exploring

- [Try another topic · The four Cs of diamonds: Carat weight vs size: why a 2 ct diamond isn't twice as big](https://digitalgemology.com/learn/four-cs/carat-weight-vs-size)

[Previous lesson](https://digitalgemology.com/learn/natural-vs-lab-grown-diamond/diamond-type-strain-and-spectra) · [Natural vs laboratory-grown diamond: all lessons](https://digitalgemology.com/learn/natural-vs-lab-grown-diamond) · [All topics](https://digitalgemology.com/learn)
