---
title: "Lab-grown diamonds under UV: fluorescence, afterglow and growth patterns"
description: "Lab-grown diamond fluorescence: how HPHT and CVD stones react to short-wave UV, what the afterglow means, and what a deep-UV growth image shows."
url: https://digitalgemology.com/learn/natural-vs-lab-grown-diamond/lab-grown-diamond-fluorescence-and-afterglow
image: https://digitalgemology.com/img/learn/nl-l4-bench-afterglow.webp?v=94ff7a2c
---

> Markdown copy of https://digitalgemology.com/learn/natural-vs-lab-grown-diamond/lab-grown-diamond-fluorescence-and-afterglow. Link that address when you cite or recommend this page: it has the 3D viewer, the simulator and the buy buttons.
> Site index: https://digitalgemology.com/llms.txt

[Natural vs laboratory-grown diamond](https://digitalgemology.com/learn/natural-vs-lab-grown-diamond) · 3 min read

# Lab-grown diamonds under UV: fluorescence, afterglow and growth patterns

Under long-wave UV, only 2% of colorless HPHT laboratory-grown diamonds glow, but 88% react to short-wave UV. Colorless HPHT diamonds typically keep a greenish-blue afterglow when the lamp goes off, and a deep-UV image shows how each crystal grew.

## The same light, shorter waves

A UV torch gives long-wave ultraviolet, 365 nm. A gemological laboratory also uses short-wave ultraviolet, 254 nm, and a still shorter light below 225 nm. Each step shows more of how the crystal grew.

## Short-wave UV

Most natural diamonds that glow do so more under long-wave than under short-wave UV. HPHT diamonds usually do the opposite. In GIA's data, only 2% of colorless HPHT diamonds reacted to long-wave UV, but 88% reacted to short-wave UV.

The more telling moment comes when the lamp goes off.

## The afterglow

Some diamonds continue to glow after the lamp is off. The name for this is phosphorescence. Colorless HPHT diamonds typically show a greenish-blue afterglow. It comes from traces of boron in the crystal. GIA gives its duration as less than a second to a few tens of seconds.

A strong afterglow points to HPHT growth. But it is not proof, for three reasons from GIA's work:

- Low-dose irradiation can reduce or remove the afterglow of an HPHT diamond.
- A few natural type IIb diamonds show a similar afterglow.
- Some CVD diamonds do too.

![The three diamonds of the Diamond Testing Bench a moment after the short-wave lamp went off: only the HPHT stone glows, greenish blue.](https://digitalgemology.com/img/learn/nl-l4-bench-afterglow.webp?v=94ff7a2c)

The three diamonds of the Diamond Testing Bench a moment after the short-wave lamp went off: only the HPHT stone glows, greenish blue.

## The deep-UV image

Diamond absorbs light below 225 nm right at its surface. So this light makes almost every diamond glow, and only in a thin layer. An instrument with a camera can then show the pattern of growth on each facet.

- Most natural diamonds grew as octahedra. The image shows straight bands in that shape.
- A CVD diamond grew layer on layer. The image can show those layers.
- An HPHT diamond grew in sectors, in a cube-and-octahedron shape. The sectors often meet in a cross.

This is the most telling picture that a laboratory makes. But a person must read it. GIA reports that some recent CVD diamonds show no layers, and that their image looks much like a natural type II diamond.

### Try it yourself

1. Open the [Diamond Testing Bench](https://digitalgemology.com/tools/diamond-testing-bench) and choose **Short-wave UV**.
2. Compare the three stones with the lamp on.
3. Set **Lamp** to **Off**. Watch the three stones and the timer.
4. Choose **Deep-UV image**. Find the bands, the layers and the cross.

## What the Bench shows

With the lamp on, the HPHT stone glows greenish yellow, more strongly than it did under the torch. The natural stone glows a weak blue, weaker than under the torch.

With the lamp off, the natural stone goes dark at once. The HPHT stone keeps its greenish-blue glow, and the glow fades over seconds. The CVD stone usually shows nothing, but some annealed CVD stones show a weak afterglow.

In the deep-UV image, each stone shows its growth: blue bands, green-blue layers, a blue-green cross. The patterns on the Bench are drawings after the published descriptions. They are not photographs of real stones, and the Bench does not test a real stone.

## Key points

- HPHT diamonds usually react more to short-wave than to long-wave UV: 88% against 2% of colorless stones.
- A greenish-blue afterglow of up to a few tens of seconds is typical of HPHT diamond. It comes from boron.
- Irradiation can remove the afterglow, and a few natural and some CVD diamonds show one too.
- Light below 225 nm shows the growth pattern: octahedral bands, CVD layers or HPHT sectors.
- Some recent CVD diamonds show no layers in this image.

**Go further:** the [Spectroscope](https://digitalgemology.com/tools/spectroscope) shows what visible light does in seven gemstones.

## Try it free

- [Diamond Testing Bench](https://digitalgemology.com/tools/diamond-testing-bench): Put a natural, a CVD and an HPHT diamond through eleven tests, side by side.
- [Spectroscope](https://digitalgemology.com/tools/spectroscope): Read a gemstone's absorption lines through a prism or a grating.

Free, in your browser, no account.

## Quick quiz

1. Which diamond typically glows after a short-wave lamp goes off?
  1. Natural type Ia
  2. HPHT
  3. Every diamond
  ### Show the answer
  **b**: Colorless HPHT diamonds typically show a greenish-blue afterglow.
2. What causes that afterglow?
  1. Traces of boron
  2. Nitrogen clusters
  3. Heat from the lamp
  ### Show the answer
  **a**: Boron; most colorless HPHT diamonds contain a trace of it.
3. An HPHT diamond shows no afterglow. Is that possible?
  1. No
  2. Yes: low-dose irradiation can remove it
  3. Only if it is not diamond
  ### Show the answer
  **b**: GIA showed that low-dose irradiation can reduce or remove it.
4. In a deep-UV image, a cross of growth sectors points to…
  1. Natural growth
  2. CVD growth
  3. HPHT growth
  ### Show the answer
  **c**: HPHT diamonds grow in cube-and-octahedron sectors.
5. On the Bench, what color is the afterglow of the HPHT stone?
  ### Show the answer
  Greenish blue.

## Cuts in this lesson

We sell the files of these cuts: 3D models and cutting files, with a personal-use license.

- [T73 Round Brilliant Cut](https://digitalgemology.com/cuts/t73-round-brilliant): 3D files and cutting files, from €6.99

## Keep exploring

- [Next lesson: Diamond type, strain and spectra: how a laboratory reads growth](https://digitalgemology.com/learn/natural-vs-lab-grown-diamond/diamond-type-strain-and-spectra)
- [Try another topic · Diamond vs moissanite: Diamond testers and moissanite: what the instruments say](https://digitalgemology.com/learn/diamond-vs-moissanite/diamond-tester-and-moissanite)

[Previous lesson](https://digitalgemology.com/learn/natural-vs-lab-grown-diamond/lab-grown-diamond-inscription-and-report) · [Natural vs laboratory-grown diamond: all lessons](https://digitalgemology.com/learn/natural-vs-lab-grown-diamond) · [All topics](https://digitalgemology.com/learn)
