---
title: "Rectangle Cut Cubic Zirconia: Pros, Cons & Face-up Size"
description: "Rectangle cut cubic zirconia: Face-up size 121 against 100 for the T73, level with the marquise, but Brilliance 51 and 39% leakage."
url: https://digitalgemology.com/gemstones/cubic-zirconia/rectangle
image: https://digitalgemology.com/img/stone-cuts/rectangle-cubic-zirconia-og.jpg?v=ec9c5b4d
---

> Markdown copy of https://digitalgemology.com/gemstones/cubic-zirconia/rectangle. Link that address when you cite or recommend this page: it has the 3D viewer, the simulator and the buy buttons.
> Site index: https://digitalgemology.com/llms.txt

# Rectangle Cut Cubic Zirconia: as much face for its weight as any cut we measure

**Buy (instant download, personal-use license):** [Rectangle Cut 3D files, €9.99 · Personal use](https://digitalgemology.lemonsqueezy.com/checkout/buy/1e627cbe-69a3-44f0-a5da-e5cab29131b8) · [Rectangle Cut cutting files, €6.99 · Personal use](https://digitalgemology.lemonsqueezy.com/checkout/buy/1d8e7f45-2f16-44f2-8215-0aea13e29c3b) · [Get the cube free](https://digitalgemology.lemonsqueezy.com/checkout/buy/2d1ab55f-2bd6-4897-a4cd-f3320f54e99e)

Brilliance 51 · Fire 87 · Scintillation 63 · in our census, where the T73 scores 98 · 87 · 80 in cubic zirconia

With straight sides and square corners, the rectangle shows as much face for its weight as any cut we measure. In CZ it out-fires a diamond rectangle, and returns about half the T73's light.

[See it in the simulator](https://digitalgemology.com/tools/3d_gemstone_simulator?cut=rectangle&stone=cubic-zirconia&ct=1.00&view=up&lighting=sun&turn=0) [Get the files](https://digitalgemology.com/gemstones/cubic-zirconia/rectangle#buy)

Rendered in our 3D Gemstone Simulator from the Rectangle Cut model, 1.00 ct, studio light.

## Rectangle Cut Cubic Zirconia

Our rectangle is a step cut with wide steps and no cropped corners: 45 facets, 1.506 to 1, 62.0% deep, over a 33.48° pavilion. Its pavilion facets repeat evenly, a full 100 for symmetry.

Face-up size is where it leads. Light is where it loses: 39% leaks through the back. The pavilion is below the 38.1° guide minimum we give for round designs. We have not measured a steeper rectangle.

## Does a rectangle cut suit cubic zirconia? Pros and cons

### Pros

- [As much face for its weight as any cut we measure](https://digitalgemology.com/gemstones/cubic-zirconia/rectangle#pro-faceup) 121 vs 100
- [More fire than a diamond rectangle](https://digitalgemology.com/gemstones/cubic-zirconia/rectangle#pro-fire) 87 vs 77

### Cons

- [Heavier than diamond](https://digitalgemology.com/gemstones/cubic-zirconia/rectangle#con-weight) 3.46 vs 2.10 ct
- [About half the T73's light](https://digitalgemology.com/gemstones/cubic-zirconia/rectangle#con-brilliance) 51 vs 98
- [Nearly two-fifths of the light leaks](https://digitalgemology.com/gemstones/cubic-zirconia/rectangle#con-leak) 39 vs 1
- [Fewer flashes than a round](https://digitalgemology.com/gemstones/cubic-zirconia/rectangle#con-scint) 63 vs 80

Compared with the T73 Round Brilliant in cubic zirconia and with the Rectangle Cut in diamond. A difference counts from 3 points (Brilliance, Fire, Tilt, Leakage), 5 (Scintillation, Symmetry), 4% (face-up size per carat) or 5% (weight); Tilt counts as a pro only for a stone within 5 points of the brilliance it is compared with. [How we measure](https://digitalgemology.com/about/how-we-measure).

## All eight scores against the T73

At a glance: the Rectangle Cut in cubic zirconia (white) against the T73 Round Brilliant in cubic zirconia (dashed): solid white where it reaches further, hatched where it falls short. Each pro and con is explained, with pictures, below.

Against the T73 Round Brilliant in cubic zirconia: level on 3, behind on 5.

- Global 69, the comparison 93, difference −24
- Brilliance 51, the comparison 98, difference −47
- Fire 87, the comparison 87, difference 0
- Scintillation 63, the comparison 80, difference −17
- Spread 100, the comparison 100, difference 0
- Symmetry 100, the comparison 100, difference 0
- Shape-norm 67, the comparison 106, difference −39
- Tilt 75, the comparison 87, difference −12

Face-up light census, a different measure from the Cut Grading Tool; Spread and Shape-norm above 100 sit on the ring. Spread is the census's estimate from depth alone; the face-up size in the pros and cons is measured from each model's outline.

[Open it in the Cut Performance Wheel](https://digitalgemology.com/tools/cut-performance-wheel?cut=rectangle&stone=cubic-zirconia)

## What the rectangle gives cubic zirconia

### As much face for its weight as any cut we measure

**Face-up size 121** against 100 for the T73 Round Brilliant in cubic zirconia (T73 = 100): 21% more face-up area for the same weight

At 62.0% deep the rectangle is about as deep as the T73, 61.7%, so its lead comes from its long, square-cornered outline. Face-up size 121 ties the marquise for the top of our census.

*Face-up outline of the Rectangle Cut at 1.00 ct in cubic zirconia: 6.47 x 4.30 mm, drawn to scale*

Rectangle Cut · 6.47 x 4.30 mm at 1.00 ct · Face-up size 121

*Face-up outline of the T73 Round Brilliant at 1.00 ct in cubic zirconia: 5.49 mm, drawn to scale*

T73 Round Brilliant · 5.49 mm at 1.00 ct · Face-up size 100

Both stones weigh 1.00 ct in cubic zirconia and are drawn to the same scale in millimeters, from each cut's own model. Face-up size is the outline's area per carat, with the T73 at 100: a deeper stone, or a rounder outline, spreads less area for its weight.

[Try it yourself: See its size at 1.00 ct in cubic zirconia in the 3D Gemstone Simulator](https://digitalgemology.com/tools/3d_gemstone_simulator?cut=rectangle&stone=cubic-zirconia&ct=1.00&view=up&lighting=studio&turn=0)

### More fire than a diamond rectangle

**Fire 87** against 77 for the Rectangle Cut in diamond: 10 points higher

In diamond the rectangle scores 77. Cut in CZ, it reaches 87, level with the T73 there.

Rectangle Cut in cubic zirconia · Fire 87

Rectangle Cut in diamond · Fire 77

Look at the colored flashes: those are fire. Same light, same size, same face-up angle; rendered by our 3D Gemstone Simulator from each cut's own model.

[Try it yourself: See the fire in the 3D Gemstone Simulator](https://digitalgemology.com/tools/3d_gemstone_simulator?cut=rectangle&stone=cubic-zirconia&ct=1.00&view=up&lighting=sun&turn=0)

## The catch with a rectangle CZ

### Heavier than diamond

**3.46 ct** at 6.5 mm, against 2.10 ct for the same cut in diamond (+65%)

A rectangle 6.5 mm wide is 1.506 times as long. In CZ it weighs 3.46 ct, and in diamond 2.10 ct. CZ's density, about 5.8 against 3.52, makes the gap.

*Weight of a 6.5 mm Rectangle Cut: 3.46 ct in cubic zirconia, 2.10 ct in diamond*

A Rectangle Cut 6.5 mm across, weighed from the model's measured volume and each stone's specific gravity.

**What helps:** Choose it by millimeters.

[Try it yourself: Weights in every gemstone on the Rectangle Cut page](https://digitalgemology.com/cuts/rectangle#stones)

### About half the T73's light

**Brilliance 51** against 98 for the T73 Round Brilliant in cubic zirconia: 47 points lower

Wide steps over a 33.48° pavilion let a large share of the light out of the back. The diamond rectangle returns 50, so the gap comes from the cut, not the stone.

Rectangle Cut in cubic zirconia · Brilliance 51

T73 Round Brilliant in cubic zirconia · Brilliance 98

Red, green and blue = light returning to the eye; gray = leakage, light that leaves heading down or stays inside. This is the head-on view; the Brilliance score averages a wider cone of light, so the score can differ from what one picture shows.

**What helps:** The [Emerald Cut Cubic Zirconia](https://digitalgemology.com/gemstones/cubic-zirconia/emerald-cut) crops the corners and returns 59. When light comes first, choose the [T73 Round Brilliant Cubic Zirconia](https://digitalgemology.com/gemstones/cubic-zirconia/t73-round-brilliant).

[Try it yourself: Open this Light Return map in the simulator](https://digitalgemology.com/tools/3d_gemstone_simulator?cut=rectangle&stone=cubic-zirconia&ct=1.00&view=up&map=1&turn=0)

### Nearly two-fifths of the light leaks

**Leakage 39** against 1 for the T73 Round Brilliant in cubic zirconia: 38 points higher

39% in our census, against 1% for the T73 in CZ. The diamond rectangle loses 32%. Only three cuts we measure in CZ leak more.

Rectangle Cut in cubic zirconia · Leakage 39

0° · 34% leak

10° · 42% leak

20° · 46% leak

30° · 55% leak

T73 Round Brilliant in cubic zirconia · Leakage 1

0° · 0% leak

10° · 1% leak

20° · 9% leak

30° · 21% leak

Each frame is the Light Return map with the stone tilted away from you by the angle shown; gray is leakage. The share under each frame is that picture's own.

**What helps:** A smaller rectangle leaks the same share. The [Emerald Cut Cubic Zirconia](https://digitalgemology.com/gemstones/cubic-zirconia/emerald-cut) leaks 25%.

[Try it yourself: Tilt it yourself in the simulator's light map](https://digitalgemology.com/tools/3d_gemstone_simulator?cut=rectangle&stone=cubic-zirconia&ct=1.00&view=up&map=1&turn=0)

### Fewer flashes than a round

**Scintillation 63** against 80 for the T73 Round Brilliant in cubic zirconia: 17 points lower

45 facets against the T73's 73. Steps make long, even reflections, not many small flashes.

*Facet diagram of the Rectangle Cut: its crown, seen face-up, 45 facets in all*

Rectangle Cut · 45 facets · Scintillation 63

*Facet diagram of the T73 Round Brilliant: its crown, seen face-up, 73 facets in all*

T73 Round Brilliant · 73 facets · Scintillation 80

Scintillation follows the number of facets: more facets, more and smaller flashes as the stone moves. Compare the facet counts under the drawings; each drawing shows only the crown. Drawn from each cut's own model.

**What helps:** The facet plan sets it. The [Emerald Cut Cubic Zirconia](https://digitalgemology.com/gemstones/cubic-zirconia/emerald-cut) reaches 72 with more steps.

[Try it yourself: Compare the Scintillation spoke in the Cut Performance Wheel](https://digitalgemology.com/tools/cut-performance-wheel?cut=rectangle&stone=cubic-zirconia)

## Who a rectangle CZ suits

Choose the rectangle in CZ for bars, side stones and minimalist settings, where a large, clean face for the weight matters more than light.

If you like the outline but want more light and less leakage, the [Emerald Cut Cubic Zirconia](https://digitalgemology.com/gemstones/cubic-zirconia/emerald-cut) does better on both. The cost is a smaller face for the weight, 105. For light above all, choose a round such as [DG-Vitruvio Cubic Zirconia](https://digitalgemology.com/gemstones/cubic-zirconia/dg-vitruvio).

## Rectangle Cut Cubic Zirconia: questions

### Does a rectangle cut CZ look big for its carat weight?

Yes: Face-up size 121 against 100 for the T73, level with the marquise at the top of our measurements.

### Is a rectangle cut CZ bright?

Not by a round's standard. It returns 51 to the T73's 98, and 39% of the light leaks.

### Rectangle or emerald cut in CZ?

The emerald cut wins on light, 59 to 51, and loses less through the back, 25% to 39%. The rectangle faces up larger, 121 against 105.

### What does a 6.5 mm wide rectangle CZ weigh?

3.46 ct here and 2.10 ct in diamond.

## Get the Rectangle Cut files

*6 formats* *Millimeters* *Watertight*

### Rectangle Cut 3D files

The Rectangle Cut as exact geometry: 45 planar facets, real-world scale, ready for CAD, rendering, printing and casting.

- **STEP** Exact faceted solid for CAD
- **3DM** Rhino, closed mesh on its own layer
- **STL** Watertight mesh for printing and casting
- **OBJ** Mesh for modeling and rendering
- **FBX** Blender, 3ds Max, Maya, Cinema 4D, Unity, Unreal
- **GLB** Web, AR and quick previews

€9.99 · [Personal use](https://digitalgemology.com/licence) [Buy the 3D files](https://digitalgemology.lemonsqueezy.com/checkout/buy/1e627cbe-69a3-44f0-a5da-e5cab29131b8)

*GemCad* *96 index*

### Rectangle Cut cutting files

The Rectangle Cut as a faceting design: 41 + 4 girdles = 45 facets, 96 index, 2-fold mirror-image symmetry, ready for the machine.

- **.asc** GemCad design file, 96 index gear
- **.csv** Tier table: angles, indices and cutting order
- **Diagram** Printable faceting diagram

€6.99 · [Personal use](https://digitalgemology.com/licence) [Buy the cutting files](https://digitalgemology.lemonsqueezy.com/checkout/buy/1d8e7f45-2f16-44f2-8215-0aea13e29c3b)

Not sure the files open in your software? [Get the cube free](https://digitalgemology.lemonsqueezy.com/checkout/buy/2d1ab55f-2bd6-4897-a4cd-f3320f54e99e): the same six formats, for your email address, used only to send them ([privacy](https://digitalgemology.com/privacy#free-sample)).

Questions before you buy? [Email us](mailto:support@digitalgemology.com).

## More gemstones and cuts

[Cubic Zirconia: optical properties and the top ten cuts](https://digitalgemology.com/gemstones/cubic-zirconia) · [The Rectangle Cut: specifications, model and files](https://digitalgemology.com/cuts/rectangle)

### Other cuts in cubic zirconia

- [Old Single Cut](https://digitalgemology.com/gemstones/cubic-zirconia/old-single)
- [Mazarin Cut](https://digitalgemology.com/gemstones/cubic-zirconia/mazarin)
- [Peruzzi Cut](https://digitalgemology.com/gemstones/cubic-zirconia/peruzzi)
- [Old Mine Cut](https://digitalgemology.com/gemstones/cubic-zirconia/old-mine)
- [Old European Cut](https://digitalgemology.com/gemstones/cubic-zirconia/old-european)
- [DG-Miliano](https://digitalgemology.com/gemstones/cubic-zirconia/dg-miliano)
- [DG-Rafaello](https://digitalgemology.com/gemstones/cubic-zirconia/dg-rafaello)
- [DG-Vitruvio](https://digitalgemology.com/gemstones/cubic-zirconia/dg-vitruvio)
- [T105 Round Brilliant](https://digitalgemology.com/gemstones/cubic-zirconia/t105-round-brilliant)
- [T73 Round Brilliant](https://digitalgemology.com/gemstones/cubic-zirconia/t73-round-brilliant)
- [T57 Round Brilliant](https://digitalgemology.com/gemstones/cubic-zirconia/t57-round-brilliant)
- [DG-Anteros](https://digitalgemology.com/gemstones/cubic-zirconia/dg-anteros)
- [DG-M5](https://digitalgemology.com/gemstones/cubic-zirconia/dg-m5)
- [Cushion Cut](https://digitalgemology.com/gemstones/cubic-zirconia/cushion)
- [Portuguese Bird's Nest Cut](https://digitalgemology.com/gemstones/cubic-zirconia/portuguese-birds-nest)
- [Trilliant Cut](https://digitalgemology.com/gemstones/cubic-zirconia/trilliant)
- [Square Cut](https://digitalgemology.com/gemstones/cubic-zirconia/square)
- [Trillion Cut](https://digitalgemology.com/gemstones/cubic-zirconia/trillion)
- [Oval Cut](https://digitalgemology.com/gemstones/cubic-zirconia/oval)
- [DG-Octagonal Kite](https://digitalgemology.com/gemstones/cubic-zirconia/dg-octagonal-kite)
- [Marquise Cut](https://digitalgemology.com/gemstones/cubic-zirconia/marquise)
- [Asscher Cut](https://digitalgemology.com/gemstones/cubic-zirconia/asscher)
- [Princess Cut](https://digitalgemology.com/gemstones/cubic-zirconia/princess)
- [DG-Broken Hearts and Arrows](https://digitalgemology.com/gemstones/cubic-zirconia/dg-broken-hearts-and-arrows)
- [Baguette Cut](https://digitalgemology.com/gemstones/cubic-zirconia/baguette)
- [Emerald Cut](https://digitalgemology.com/gemstones/cubic-zirconia/emerald-cut)
- [Pear Cut](https://digitalgemology.com/gemstones/cubic-zirconia/pear)
- [Radiant Cut](https://digitalgemology.com/gemstones/cubic-zirconia/radiant)
- [Teardrop Cut](https://digitalgemology.com/gemstones/cubic-zirconia/teardrop)
- [Emerald Square Cut](https://digitalgemology.com/gemstones/cubic-zirconia/emerald-square)
- [Radiant Square Cut](https://digitalgemology.com/gemstones/cubic-zirconia/radiant-square)
- [Triangle Cut](https://digitalgemology.com/gemstones/cubic-zirconia/triangle)
- [Hexagon Cut](https://digitalgemology.com/gemstones/cubic-zirconia/hexagon)
- [Octagon Cut](https://digitalgemology.com/gemstones/cubic-zirconia/octagon)
- [DG-Bowtie](https://digitalgemology.com/gemstones/cubic-zirconia/dg-bowtie)
- [DG-Elongated Hexagon](https://digitalgemology.com/gemstones/cubic-zirconia/dg-elongated-hexagon)

### The Rectangle Cut in other gemstones

- [Diamond](https://digitalgemology.com/gemstones/diamond/rectangle)
- [Moissanite](https://digitalgemology.com/gemstones/moissanite/rectangle)
- [Ruby](https://digitalgemology.com/gemstones/ruby/rectangle)
- [Sapphire](https://digitalgemology.com/gemstones/sapphire/rectangle)
- [Emerald](https://digitalgemology.com/gemstones/emerald/rectangle)
- [Amethyst](https://digitalgemology.com/gemstones/amethyst/rectangle)
- [Topaz](https://digitalgemology.com/gemstones/topaz/rectangle)
- [Spinel](https://digitalgemology.com/gemstones/spinel/rectangle)
- [Demantoid](https://digitalgemology.com/gemstones/demantoid/rectangle)
- [Zircon](https://digitalgemology.com/gemstones/zircon/rectangle)
- [Tourmaline](https://digitalgemology.com/gemstones/tourmaline/rectangle)
- [Peridot](https://digitalgemology.com/gemstones/peridot/rectangle)
- [Tanzanite](https://digitalgemology.com/gemstones/tanzanite/rectangle)
- [YAG](https://digitalgemology.com/gemstones/yag/rectangle)
- [Pyrope](https://digitalgemology.com/gemstones/pyrope/rectangle)
- [Almandine](https://digitalgemology.com/gemstones/almandine/rectangle)
- [Spessartine](https://digitalgemology.com/gemstones/spessartine/rectangle)
- [Grossular](https://digitalgemology.com/gemstones/grossular/rectangle)
- [Chrysoberyl](https://digitalgemology.com/gemstones/chrysoberyl/rectangle)
- [Kunzite](https://digitalgemology.com/gemstones/kunzite/rectangle)
- [Iolite](https://digitalgemology.com/gemstones/iolite/rectangle)
- [Morganite](https://digitalgemology.com/gemstones/morganite/rectangle)
- [GGG](https://digitalgemology.com/gemstones/ggg/rectangle)
- [Strontium titanate](https://digitalgemology.com/gemstones/strontium-titanate/rectangle)
- [Synthetic rutile](https://digitalgemology.com/gemstones/synthetic-rutile/rectangle)
