---
title: "The 3D models | How we measure"
description: "How Digital Gemology's 3D models are built and measured: geometry, volume and weight, proportions, and how each cutting file is checked against its model."
url: https://digitalgemology.com/about/how-we-measure/3d-models
image: https://digitalgemology.com/img/og-digital-gemology.png?v=d224fb01
---

> Markdown copy of https://digitalgemology.com/about/how-we-measure/3d-models. Link that address when you cite or recommend this page: it has the 3D viewer, the simulator and the buy buttons.
> Site index: https://digitalgemology.com/llms.txt

[How we measure](https://digitalgemology.com/about/how-we-measure)

# The 3D models

## Geometry and units

Each model is a closed, watertight solid of flat facets, in millimeters. The table faces +Y, and the girdle plane goes through the origin. Every cut except the heart is convex. So the tools describe each cut as an intersection of half-spaces, one per facet:

`S = {x:n_i · x ≤ d_i for every facet i}`

where *n* _*i* is the unit outward normal of the facet and *d* _*i* is its distance from the center. A ray enters at the last plane it crosses on the way in. It leaves at the first plane it meets on the way out. We trace the heart triangle by triangle instead.

A convex stone is the space on the inner side of every facet plane.

The facet count on a cut page is the number of planar faces of the STEP solid. Sometimes the cutting design counts differently. For example, a turned girdle is one surface in the solid but many facets on the machine. Then the page gives both counts.

## Volume and weight

Weight in carats follows from volume *V* in mm³ and specific gravity *ρ* in g/cm³:

`m = (V · ρ)/200 ct`

because a carat is 0.2 g and a cubic centimeter is 1,000 mm³. Every weight on a cut page uses this formula. At a given shape, weight scales with the cube of size. So the simulator scales each model by

`k = ((200 m)/(ρ V_ref))^(1/3)`

to reach the carat weight you choose. Here *V* _ref is the volume at the reference size of the model. Each time, the build measures the volume of every model from its mesh. It uses the divergence theorem over the triangles:

`V = (1/6)∑_triangles a · (b × c)`

The build measures size, length to width and depth from the same mesh, with the stone turned level in plan. Rounds keep their diameter across the girdle corners. The cut pages print these figures. The build also checks them against the measurements of the STEP solid. It stops if a mesh is not closed. In a closed mesh, exactly two triangles share every edge.

## Proportions

- **Total depth** is a percentage of the width, the shorter side in plan.
- **Length to width** is the ratio of the plan’s bounding box, to three decimals.
- **Table** is the extent of the table over the width. For rounds, we measure it across the corners of the table: the largest of 64 directions.
- **Crown and pavilion angles** are the main tiers that the cutting design itself gives. If a design names none, the angles come from the specification of the model. If that also fails, they come from the most common facet angle, area-weighted, in 0.5° bins. Each facet gets the weight of its projected area *A* |*n _y*|. We measure angles from the girdle plane: the angle of a facet is arccos |*n _y*|.
- **Girdle** facets are the facets within about 1° of vertical. We sample their thickness at every vertex column, and the page gives the minimum and maximum.

## Cutting-file accuracy

Each cut page states how closely the cutting file matches the 3D model. Each facet in the .asc file has an angle *a* and an index *i* on a gear of *g* teeth. It becomes a normal:

`n = (sin a cos φ, ± cos a,sin a sin φ), φ = (2 π i)/g`

The index gives the direction around the stone. The angle gives the tilt from the axis.

We then turn the model about its axis in steps of a quarter index, in both handedness. We refine the best of those turns to 0.001° (a design can sit off its index origin). We keep the alignment with the smallest area-weighted mean angle between each model facet and its nearest file facet. The page reports the largest angle and the mean, and gives the girdle on its own. Facets smaller than 0.02% of the largest facet are slivers, and we leave them out. The check compares only facet directions, not where facets meet.
